| Content | Enhance your Audi S3 by adding the ARMYTRIX Super Sport Stainless Steel Exhaust System. This system will increase power, reduce weight, and improve sound. This precision-made performance system delivers more power, especially in the low and mid rev range, the effect on the sound is significant, adding a deep resonant sporty sound, but at the same time neutralizes the annoying frequencies in the most critical rpm range. Complete the look with a set of four sporty chrome polished silver tailpipes. ARMYTRIX exhaust systems differ from other brand's exhaust systems with their unique "Throttle Pedal Sensor and Engine RPM Signal Auto Functions". Through this system ARMYTRIX offers car owners a better launch-start without losing back pressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase air flow for better performance (hp & torque gained) and sound. Car owners can set their own timing for valves to automatically open and close by engine rpm and how deep they press the gas pedal. It's a new innovative system that brings your car to a different level. With the ARMYTRIX you are not getting just an exhaust system, you are getting a driving system unlike any you have experienced before. When car owners turn on the race mode (valves opened), the gas goes through the section of straight pipes. This is where you get the incredible race sound and performance gain. In full throttle and it's straight pipe all the way, which means you will be expecting the LOUDEST sound performance you'll ever hear! Features: Power ( HP): 10.4HP Torque ( Nm): 13.4 Weight (-Kg): -4.1 Valvetronic mufflers Mid-Pipe Section 1 Mid-Pipe Section 2 Wireless Remote Control Kits Stainless Steel Quad Chrome Silver Tips 3 Mode Valve System to control exhaust sound View Install Instructions Here. Notes: ARMYTRIX wireless valvetronic wiring is a plug-and-play system, no cutting, alteration or damage will be done to the factory settings. Catback system fit to stock catalytic converter will require reducer(65mm --> 3") YouTube An error occurred. Unable to execute JavaScript. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Unable to execute JavaScript. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Unable to execute JavaScript. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. ARMYTRIX VALVETRONIC: HOW IT WORKS- BRIEF OVERVIEW:As an ARMYTRIX fan, customer, or potential customer, you have likely heard of Valvetronic. It's one of the prominent selling features of ARMYTRIX exhaust systems and has shifted the entire exhaust industry towards adopting similar technology in all exhaust systems. The whole point of the Valvetronic system is to give you an option for how loud you want your car to be. If you leave early in the morning for work, you probably don't want your car to be excessively loud, as it will upset your neighbors. Once you're out on the open road or shredding a canyon road, you want to hear those awesome noises your car makes. The Valvetronic system allows you to switch between being quiet and being loud with the push of a button via the included remote or through the smartphone application; this works by tapping into a vacuum source on your engine and connecting it to the control module. When you press the button on the remote or smartphone application, you are communicating with the OBDII module via Bluetooth. This OBDII module tells the exhaust valve module to allow the engine vacuum to open or close the exhaust valve. You can also set the exhaust valve module to an automatic mode which will open/close the exhaust valve based on predetermined RPM range or throttle position. Aside from getting a brutal sound with the Valvetronic system open, you can also gain power, especially if your car is turbocharged. Depending on the car, modifications, and tune you have, the valve being open will also the exhaust gas to flow more freely, as it does not have to pass through any muffler. If your vehicle is turbocharged, you may see a slight increase in boost pressure depending if you are running an open or closed boost cycle, resulting in more horsepower.
| Description: The RM-01A was developed for gymkhana, dirt trial, and other competition spec vehicles where mid to high RPM power is crucial. Especially for race classes with strict modification restrictions; the lightweight benefits of the RM-01A can truly be realized. Improved acceleration, response, braking, cornering, reduced tire wear, and all other vehicle behaviors are influenced by weight reduction. Due to all the light weight materials and advanced construction the RM-01A is 50% lighter than OE for most applications. The RM-01A will decrease lap times with improved power and reduced weight. The main pipe and silencer body are 1.0mm, 1.2mm and 1.5mm (Except for certain models) thick SUS304 which is light weight and guaranteed to be durable. All unnecessary weight has been removed from all components, and thicknesses of materials have been selected to produce the ultimate performance exhaust. Features: Exit shape:89 straight (with holes) Pipe diameter:60.5 Minimum ground clearance:Roof height 1315mm measured in the (car verification 1320mm) car, 115mm at the front muffler rear Maximum output:Stock: 145.5kw (197.9ps) / 8080rpm - Fujitsubo: 150.6kw (204.8ps) / 8120rpm Maximum torque:Stock: 184.2Nm (18.8kgm) / 7440rpm - Fujitsubo: 186.2Nm (19.0kgm) / 7380rpm Weight:Stock: 17.1kg - Fujitsubo: 11.2kg Volume idling:Stock: 64dB - Fujitsubo: 68dB Middle RPM Sound:Stock: 78dB - Fujitsubo: 85dB High RPM Sound:Stock: 85dB - Fujitsubo: 91dB Mid RPM Acceleration Sound:Stock: 99dB - Fujitsubo: 103dB Note: Images are for illustration purpose only. Actual product may vary.
| Description: Designed for street use, it improves both low-end and mid-range power. All Legalis R systems are constructed of Stainless Steel, and feature mandrel bent piping. Each application is tested to provide optimal power output for street use, while maintaining a deep and quiet tone, which is great for everyday use. Drivers of all ages and skill levels can appreciate the increased power output, and exceptional quality. The Legalis R offers two types of mufflers, an oval crimped type, a the round type (type EVOLUTION). Fujitsubo has carefully selected an exhaust tip to make the style and character of each vehicle application. Features: Order production Exit shape:101.6 slash (12 °) Pipe diameter:60.5 Minimum ground clearance:Roof High 1392Mm (vehicle inspection 1380Mm) measuring drive, 128mm in the intermediate pipe portion (1085Mm behind the front axle) Intermediate acceleration:Stock: 3.3 seconds - Fujitsubo: 3.2 seconds Maximum output:Stock: 144.8kw (196.9ps) / 7730rpm - Fujitsubo: 147kw (199.9ps) / 7760rpm Maximum torque:Stock: 191.1Nm (19.5kgm) / 6770rpm - Fujitsubo: 192.1Nm (19.6kgm) / 6750rpm Weight:Stock: 14.1kg - Fujitsubo: 12.6kg Volume idling:Stock: 64dB - Fujitsubo: 67dB Middle RPM Sound:Stock: 74dB - Fujitsubo: 80dB High RPM Sound:Stock: 85dB - Fujitsubo: 89dB Note: Images are for illustration purpose only. Actual product may vary.
| HKS Hi Power Exhaust Acura Integra GS, LS, RS Hatchback 90-91 Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Depending on the application, Hi-Power muffler tips are 96mm, 115mm and 120mm in diameter, piping diameter ranges from 55mm to 95mm. Special Edition HKS Carbon Titanium Hi-Power Exhaust systems are exclusively available for certain popular applications. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping. Hatchback Only. Tip Diameter: 96mm Piping Diameter: 55mm NOTE: picture is for representation only, actual product may vary.
| The Buddy Club Spec II Catback Exhaust System is specially designed system for competition use only. Its simple straight thru design creates an increase of exhaust gas velocity in order to improve efficiency. This exhaust uses a middle silencer (resonator) on the main pipe to help maintain torque in the low to mid speed range. All mufflers are made with SUS304 stainless steel, 1mm is used for main pipe. and the ultra 0.8mm is used for main silencer combine with 76.2mm (3") exhaust piping. This combination creates a super light weight muffler and turbo setup to maintain broad power band. Inner silencer are included with the kit. Features: Direct Bolt On Install Light Weight and Highly Efficient Made of SUS304 Stainless Steel Efficient Middle Resonator Low Throaty Tone Note: Pictures are used for marketing purposes only, actual product may vary.
| For over 20 years, Fabspeed has been engineering and manufacturing the world's finest stainless steel high performance exhaust systems and components, air intake products, ECU tuning, and more, specifically-tailored for high-end sports cars and exotics. From Porsche to McLaren, our expertise is unmatched and it shows in everything that we do. Our dyno-proven performance products provide an exhilarating driving experience and are backed by a Limited Lifetime Warranty. Features: Direct replacement bolt-on precision crafted mandrel pipes to replace restrictive OEM heavy Acura valved exhaust No check engine light guaranteed. Complies with emissions and warranty Increased sportscar sound and Turbo spool. Save 19 pounds and 8.5 kg versus stock NSX valved exhaust Precision manufactured in USA using HAAS CNC, FLOW WATERJET, and UNISON LTD mandrel bending equipment System comes with Deluxe quad tips ready to install. Choose from Polished or Black Chrome. The tips beautifully fill in the rear bumper chrome valence surround. So much better than the factory raw pipes. YouTube An error occurred. Unable to execute JavaScript. YouTube An error occurred. Unable to execute JavaScript.
|
| Additional information |
|
|
|
|
|
| Brand |
Fabspeed
|
| Make |
Acura
|
| Model |
NSX
|
| Year |
2016, 2017, 2018, 2019, 2020, 2021, 2022
|
|
