Description | The AWE Tuning Touring Edition Exhaust System w/Polished Silver Tips Audi 8R Q5 2.0T 2010-2017 for your 2010-2017 Audi Q5 is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Greddy Supreme SP Exhaust Acura Integra 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The DC Sports Stainless Steel Exhaust System Acura Integra 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo Power Getter Exhaust Honda Accord Euro R 2000-2002 for your 2002-2006 Acura RSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo Legalis R Exhaust Honda Integra Type R 4 Door 1995-1999 for your 1995-1999 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo RM-01A Exhaust Honda Integra Type R 2001-2005 for your 2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. |
Content | Perfect tone, unlocked power and uncompromised daily driving manners. For the Q5 2.0T, AWE knew the tone and volume had to be spot on, given the varied environments this do-it-all vehicle finds itself in. It needed to deliver an eye-opening wail at full throttle yet be quiet and civil during part throttle, around town driving. Countless research and development efforts by AWE's Fabrication and Engineering Departments have yielded the finest Q5 2.0T exhaust on the market.The stock exhaust system is full of crimped tubing that hurts exhaust flow and robs horsepower. Our Q5 2.0T Exhaust was designed with smooth gradual bends and to eliminate any interruption to the flow of exhaust gasses. Our improvements to the exhaust path result in gains of +13 horsepower and +13 lb ft of torque at the crank. Replacing the large, restrictive factory mufflers also has a pleasing effect on the engine note. Our exhaust systems give the 2.0T a civilized, more melodious voice, with specific attention paid to low rpm situations at part throttle. Finishing it off This system is topped off with notable 3.5 inch slash-cut tips. The tips sport engraved AWE logos and are double walled to ensure a mirror polish, even under hard usage. Each tip is individually adjustable, so stagger and depth into bumper can be set according to personal taste. Features: AWE Touring Edition Exhaust for 8R Q5 2.0T - Chrome Silver Tips Featuring AWE 180 Technology +13 HP and +13 TQ at the crank Sophisticated tone, distinctive sound T304L stainless steel construction Lifetime Exhaust Warranty Perfect Fitment - Guaranteed Specifications: 180 Technology: Yes 50 State Legal : Yes Edition: Touring Edition Fit Guarantee : Yes Hardware Included: Yes Material: T304L Stainless Steel Muffler Quantity: 3 No CEL Guarantee : Yes System Type: Cat Back Tip Diameter: 90 Tip Diameter: 3.54 Tip Finish: Chrome Silver Tip Qty: 2 Tune Required: No Valves: No
| The classic SP exhaust for iconic (DC) Acura Integra has returned, but this time this Supreme SP is designed with larger diameter piping to suit tuned 1994-2001 Integra LS/RS and 2000-2001 Integra GSR. Ideal for bolt-on turbo or supercharger kits or high-flow N/A applications, this version features large diameter 76mm (3") muffler and piping, with only a short inlet portion of 63.5mm (2.5") to allow it to still bolt up to factory catalytic converter flanges. The large mid-pipe resonator and off-set oval Supreme SP muffler allow for deep rich exhaust note throughout the B18 engine's RPM range. Careful attention to routing allows for simple install, and OEM like fitment. All GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty Specifications: Chassis: DC Engine: B18 (94-01 B18 LS / RS & 00-01 B18C GSR) Type: Cat-Back Exhaust Number of pieces: 3 pcs Piping: 76 mm (3 ") - slight taper of 2.5" to fit the factory catalyic-conveter Tip: 105mm (4.1") Gasket(s): 3" oval (qty: 2 included) replacement Resonator: Yes Fitments: 1994-2001 Integra RS / LS (w/ B18B-series engine) 2000-2001 Integra GSR (w/ B18C-series engine)
| Bolt on some serious power and aggressive sound with a DC Sports Exhaust System. Custom-made to perfectly fit your specific application. Featuring T304 Stainless Steel material construction. All piping is mandrel bent for optimum flow, featuring a straight-through muffler design for top power output. DC Sports Exhausts are dyno-tuned for maximum performance and have an aggressive exhaust tone under acceleration. Most models exit at factory locations and install at factory mounting points on your vehicle. Incudes all necessary mounting hardware included for a quick and easy installation. Features: Single canister design T304 stainless steel piping Mandrel bent Direct bolt on design Dyno tested for maximum performance Tig welded 12-month warranty Designed and Tested in the U.S.A Installation Guide Fitments: 1994-2001 Acura Integra ALL GS-R/ GS/ LS /RS SE/ Type-R 2 Dr. 1.8L Application Note: all 2dr hatchback only
| Fujitsubo's spirit is to "produce the highest quality products". This has not changed since Fujitsubo was first established in 1931. This spirit does not only pertain to creating highly efficient and high quality exhausts and manifolds, but it also applies to our customer's satisfaction. This is the reason Research and development is performed with people, motor vehicles, society, environment etc, all thought as one, to create a product through diversity. POWER Getter Series This series was developed to provide great exhaust flow improving torque throughout the low and mid RPM range and increased maximum power. The high quality construction and enhanced diameter allows for sporty yet subtle exhaust note. Clean basic design for original classic stainless look. A great cost-performance option with tuning diversity from normal to tuned engines. The Fujitsubo Power Getter exhausts are high performance replacement cat back exhaust systems manufactured from stainless steel and offer the most optimal pipe design for improved power throughout the entire rev range. Features: Pipe Diameter Exhaust: 60.5mm Maximum output: Stock: 140.4kw(190.9ps)/7250rpm - Fujitsubo: 144.9kw(197.1ps)/7210rpm Maximum torque: 204.8Nm(20.9kgm)/5740rpm - Fujitsubo: 208.7Nm(21.3kgm)/5720rpm Stock Weight: Stock: 24.0kg - Fujitsubo: 11.8kg Volume idling: Stock: 65dB - Fujitsubo: 70dB Middle RPM Sound: Stock: 85dB - Fujitsubo: 93dB High RPM Sound: Stock: 91dB - Fujitsubo: 108dB Mid RPM Acceleration Sound: Stock: 81dB - Fujitsubo: 88dB
| Description: Designed for street use, it improves both low-end and mid-range power. All Legalis R systems are constructed of Stainless Steel, and feature mandrel bent piping. Each application is tested to provide optimal power output for street use, while maintaining a deep and quiet tone, which is great for everyday use. Drivers of all ages and skill levels can appreciate the increased power output, and exceptional quality. The Legalis R offers two types of mufflers, an oval crimped type, a the round type (type EVOLUTION). Fujitsubo has carefully selected an exhaust tip to make the style and character of each vehicle application. Features: Order production Exit shape:90 slash (12 °) Pipe diameter:60.5 Minimum ground clearance:Roof height 1340 mm (automobile inspection certificate 1350 mm) measured in vehicles, No.2, 115 mm in No.3 connecting flange Intermediate acceleration:Stock: 3.8 seconds - Fujitsubo: 3.7 seconds Maximum output:Stock: 142.1kw (193.3ps) / 7930rpm - Fujitsubo: 143kw (194.5ps) / 7840rpm Maximum torque:Stock: 178.4Nm (18.2kgm) / 6580rpm - Fujitsubo: 182.3Nm (18.6kgm) / 6410rpm Weight:Stock: 17.2kg - Fujitsubo: 13.8kg Volume idling:Stock: 63dB - Fujitsubo: 61dB Middle RPM Sound:Stock: 75dB - Fujitsubo: 77dB High RPM Sound:Stock: 85dB - Fujitsubo: 89dB Mid RPM Acceleration Sound:Stock: 99dB - Fujitsubo: 102dB Note: Images are for illustration purpose only. Actual product may vary.
| Description: The RM-01A was developed for gymkhana, dirt trial, and other competition spec vehicles where mid to high RPM power is crucial. Especially for race classes with strict modification restrictions; the lightweight benefits of the RM-01A can truly be realized. Improved acceleration, response, braking, cornering, reduced tire wear, and all other vehicle behaviors are influenced by weight reduction. Due to all the light weight materials and advanced construction the RM-01A is 50% lighter than OE for most applications. The RM-01A will decrease lap times with improved power and reduced weight. The main pipe and silencer body are 1.0mm, 1.2mm and 1.5mm (Except for certain models) thick SUS304 which is light weight and guaranteed to be durable. All unnecessary weight has been removed from all components, and thicknesses of materials have been selected to produce the ultimate performance exhaust. Features: Exit shape:89 straight (with holes) Pipe diameter:60.5 Minimum ground clearance:Roof High 1392Mm (vehicle inspection 1380Mm) measuring drive, 129 mm in the intermediate pipe section (1490Mm behind the front axle) Intermediate acceleration:Stock: 3.4 seconds - Fujitsubo: 3.3 seconds Maximum output:Stock: 141.4kw (192.3ps) / 7580rpm - Fujitsubo: 144.5kw (196.5ps) / 7710rpm Maximum torque:Stock: 186.2Nm (19.0kgm) / 6790rpm - Fujitsubo: 189.1Nm (19.3kgm) / 6600rpm Weight:Stock: 14.1kg - Fujitsubo: 9.5kg Volume idling:Stock: 64dB - Fujitsubo: 70dB Middle RPM Sound:Stock: 74dB - Fujitsubo: 83dB High RPM Sound:Stock: 85dB - Fujitsubo: 89dB Mid RPM Acceleration Sound:Stock: 99dB - Fujitsubo: 103dB Note: Images are for illustration purpose only. Actual product may vary.
|
Additional information |
Brand |
AWE Tuning
|
Make |
Audi
|
Model |
Q5
|
Sub Model |
|
Year |
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
|
|
|
|
|
|
|