Neuspeed Cold Air Intake For Audi A3

Description

The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low speed engine performance, but becomes very restrictive when the engine is operating in the higher rpm range – where most performance drivers need it. The NEUSPEED P-Flo kit now offers a choice of two filter types: the time proven oiled multi-layer cotton gauze air filter that is washable and reusable or the new dry paper media filter. After months of development, NEUSPEED has developed an intake pipe size that matches the factory MAF exactly. Because of this fuel trims are not affected and will not trigger any DTCs. In addition, eliminating the OE plastic MAF housing showed an increase in airflow, as no pre-screen is required to reduce turbulence when air is routed through the long piping with its smooth mandrel bends. Flow bench test results: Stock airbox assembly including filter: 346 CFM @ 23″of water NEUSPEED P-FLO Kit including filter: 529 CFM @ 23″of water Dry filter features: A disposable Filter that will not sacrifice performance. Comparable airflow to our Oiled Cotton Filters with the same Great Protection. Last for up to 30,000 miles of highway driving. Extend the life of the filter using compressed air to clean off excessive debris. Fits: 2006-2008 Audi A3 8P FWD 2.0T FSI 2008-2009 Audi TT 8J FWD 2.0T FSI 2006-2008 Golf / Golf R / Jetta / Passat FWD 2.0T FSI 2010-2013 Scirocco R 2.0T FSI CDL Note(s): As the OE engine cover is an integral part of the OE air intake box, it must be removed as part of the installation of the NEUSPEED P-Flo kit. CARB Exempt: Executive Order # D-236-22 Stainless heat shield, red pipe with dry filter