Price Match
Banks Power Cold Air Intake For Chevrolet Silverado 2500
$449.00
The Banks Power Ram-Air Cold-Air Intake System Oiled Filter Chevrolet | GMC LLY 6.6L 2004-2005 for your 2004-2005 Chevrolet Silverado 2500 is a great way to increase horsepower and torque gains by replacing your restricted factory air intake.
Did you like this product? Add to favorites now and follow the product.
Add to WishlistAlready In Wishlist
Add to Wishlist
Description
Banks Ram-Air Superiority. Flowbench developed, dyno proven cold-air intake with enclosed housing improves flow up to 57 percent. Increases power and fuel economy. Reduces exhaust gas temps and sooty, Black smoke. Passes the test. Again and again. Others build and ship without testing. Not Banks. Our Ram-Air Intakes start out as CAD software prototypes and are put through flow simulations. The design is refined until the simulation shows optimal performance. Then a hardware prototype is made and the design is validated on a flowbench. After that comes dyno testing and on-vehicle testing. It takes a superior design to pass all those tests! Filter on a stick: a joke that’s not funny. A filter on a stick is a bad joke. It’s wide-open to hot underhood engine air, and there’s no power in hot air! Ram-Air houses a giant lifetime filter in an enclosed cold-air box, which inhales cool, dense outside air – more than Banks competitors and up to 57 percent more than stock – for more power and mileage, lower EGTs and less smoke. And it’s designed to not cause fault or error codes. Bellows, too? Very exclusive. Banks Ram-Air is the only aftermarket intake with bellows. This accommodates engine movement and prevents component damage for longer service life. New Filter Options! Choose from the traditional red, Oiled filter or the all-new black, Dry filter. Details: Extensively tested and validated Enclosed housing keeps out hot, power-robbing engine air Inhales cooler outside air for more power and MPG Giant filter maximizes high-flow filtration Helps engine run cooler Accommodates engine movement Prevents component damage Extends service life and requires fewer cleanings 5-year Limited Warranty (Filter: Lifetime Limited Warranty) Gain up to +39 hp/+69 lb-ft Reduces exhaust gas temps (EGTs) and smoke Outflows stock and competitors up to 57 percent Oiled Air Filter Element Emissions compliant: CARB EO D-161-81 Ram-Air Cold-Air Intake System, Oiled Filter for use with 2004-2005 Chevy/GMC 6.6L, LLY
Additional information
| Brand | |
|---|---|
| Make | |
| Model | |
| Year | 2004, 2005 |
Quick Comparison
| Settings | Banks Power Cold Air Intake For Chevrolet Silverado 2500 remove | AEM Cold Air Intake For Acura TL remove | Genesis G70 3.3T Dual BIG MOUTH Ram Air Intake Snorkels remove | AEM Cold Air Intake For Acura ILX remove | AEM Induction Cold Air Intake System Genesis G70 remove | AEM Cold Air Intake For Acura Integra remove | ||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Banks Power Cold Air Intake For Chevrolet Silverado 2500 remove | AEM Cold Air Intake For Acura TL remove | Genesis G70 3.3T Dual BIG MOUTH Ram Air Intake Snorkels remove | AEM Cold Air Intake For Acura ILX remove | AEM Induction Cold Air Intake System Genesis G70 remove | AEM Cold Air Intake For Acura Integra remove | ||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | 42135 | 21-416C | genesis-g70-3-3t-dual-big-mouth-ram-air-intake-snorkels | 21-716P | aem-induction-cold-air-intake-system-genesis-g70 | 21-403P | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | $449.00 | $249.99 | $225.00 | $449.99 | $429.99 | $249.99 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | The Banks Power Ram-Air Cold-Air Intake System Oiled Filter Chevrolet | GMC LLY 6.6L 2004-2005 for your 2004-2005 Chevrolet Silverado 2500 is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Induction AEM Cold Air Intake System for your 2000-2003 Acura TL is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | Looking to add a subtle yet aggressive look to your Genesis G70 3.3T? Would you also like a boost in performance to complement this aggressive new appearance? You're in the right place. The Velossa Tech dual BIG MOUTH is the go-to mod for any induction setup (works with your stock or aftermarket cold air intake). | The AEM Induction AEM Cold Air Intake System for your 2013-2014 Acura ILX is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Performance Cold Air Intake System for your Genesis G70 produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned, and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. | The AEM Induction AEM Cold Air Intake System Acura Integra 1994-2001 1.8L 4-Cyl for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Banks Ram-Air Superiority. Flowbench developed, dyno proven cold-air intake with enclosed housing improves flow up to 57 percent. Increases power and fuel economy. Reduces exhaust gas temps and sooty, Black smoke. Passes the test. Again and again. Others build and ship without testing. Not Banks. Our Ram-Air Intakes start out as CAD software prototypes and are put through flow simulations. The design is refined until the simulation shows optimal performance. Then a hardware prototype is made and the design is validated on a flowbench. After that comes dyno testing and on-vehicle testing. It takes a superior design to pass all those tests! Filter on a stick: a joke that's not funny. A filter on a stick is a bad joke. It's wide-open to hot underhood engine air, and there's no power in hot air! Ram-Air houses a giant lifetime filter in an enclosed cold-air box, which inhales cool, dense outside air - more than Banks competitors and up to 57 percent more than stock - for more power and mileage, lower EGTs and less smoke. And it's designed to not cause fault or error codes. Bellows, too? Very exclusive. Banks Ram-Air is the only aftermarket intake with bellows. This accommodates engine movement and prevents component damage for longer service life. New Filter Options! Choose from the traditional red, Oiled filter or the all-new black, Dry filter. Details: Extensively tested and validated Enclosed housing keeps out hot, power-robbing engine air Inhales cooler outside air for more power and MPG Giant filter maximizes high-flow filtration Helps engine run cooler Accommodates engine movement Prevents component damage Extends service life and requires fewer cleanings 5-year Limited Warranty (Filter: Lifetime Limited Warranty) Gain up to +39 hp/+69 lb-ft Reduces exhaust gas temps (EGTs) and smoke Outflows stock and competitors up to 57 percent Oiled Air Filter Element Emissions compliant: CARB EO D-161-81 Ram-Air Cold-Air Intake System, Oiled Filter for use with 2004-2005 Chevy/GMC 6.6L, LLY | The AEM 21-416C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura TL, CL and Honda Accord models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-416C vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.25 in (133 mm) Air Filter Large End Diameter: 6 in (152 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 2.75 in (70 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 2.75 in (70 mm) Air Filter Washable: Yes CARB EO Number: D-670-15 Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 7 Color: Gunmetal Gray Coupler Color/Finish: Not Applicable Couplers Included: None Intake Pipe Color / Finish: Gunmetal Gray Intake Pipe Inlet Length: 41 in (1041 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 2.75 in (70 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 41 in (1041 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 2.75 in (70 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-202DK Street Legal In All US States: Yes Title: AEM AEM-21-416C AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 5.6 lb (2.5 kg) Notes: California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS) California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS) | Looking to add a subtle yet aggressive look to your Genesis G70 3.3T? Would you also like a boost in performance to complement this aggressive new appearance? You're in the right place. The Velossa Tech dual BIG MOUTH is the go-to mod for any induction setup (works with your stock or aftermarket cold air intake).
Our NEW Generation 4 BIG MOUTH ram air intake snorkels feature removable flare/inlets and allow you to truly customize your intake in ways never before seen! By choosing new colors, the sky is the limit! With the ease of removing the flare by unscrewing 4 sets screws, you can change the color of your BIG MOUTH to get the look that fits your self-expression. Generation 4 is a patent-pending feature that will change the way we present our cars to the world, Velossa Tech is proud to be able to offer this new innovative feature. Being able to replace a flare with ease is now a reality. Replacing flares is not just easy, but affordable!
NOTE: Generation 4 flares are not backward compatible with Generation 3 bodies.
The BIG MOUTH was developed for better overall mass air flow for stock, tuned cars, or highly modified engines, you also have the ability to customize the color of the inlet flare and body. This is truly a unique piece in that it allows you to get the performance benefits of a properly engineered ram duct and have the aesthetic appeal of your liking!!
It will bolt right directly onto the inlet cowl and feed your aftermarket or stock airbox on your Genesis G70 3.3T, in fact, it will greatly improve the performance of your stock or aftermarket intake setup.
Designed in-house right here in the USA with the latest aerospace flow path engineering and design techniques, and backed by hours and hours of R&D, fitment testing, and real-world driving, we are sure you will fall in love with American-made quality and engineering.
FEATURESMaximum performance design, optimized convergent duct Finished SMOOTH for MAXIMUM air velocity 28 color options to choose from All hardware included OEM fitment Two-layer UV protective coating for sun protection against color fade No permanent modification is necessary No tune necessary (although beneficial if you tune with the BIG MOUTH) Made in the USA | The AEM 21-716P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic SI and Acura ILX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated above the driver's side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crankcase vent tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-716P vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 1.5 in (38 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3 in (76 mm) Air Filter Washable: Yes CARB EO Number: D-670-21 Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 11 Coupler Color/Finish: Not Applicable Couplers Included: None Estimated Horsepower Gain: 8 HP @ 7000 RPM Horse Power Increase: 8 HP Intake Pipe Color / Finish: Polished Intake Pipe Inlet Length: 24 in (610 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3 in (76 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 24 in (610 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3 in (76 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-203DOSK RPM: 7000 Street Legal In All US States: See Vehicle Applications Title: AEM AEM-21-716P AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 8.3 lb (3.7 kg) Notes: California Air Resources Board Exempt: Yes; CARB EO: D-670-21; AEM - Metal Intake System; Polished (CAS) California Air Resources Board Exempt: Yes; CARB EO: D-670-21; AEM - Metal Intake System; Polished (CAS) |
OVERVIEW
| The AEM 21-403P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura Integra models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement engine breather hose and water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-403P vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Air Filter Large End Diameter: 6 in (152 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 2.5 in (64 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 2.5 in (64 mm) Air Filter Washable: Yes CARB EO Number: D-670-15 Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 7 Color: Polished Coupler Color/Finish: Not Applicable Couplers Included: None Intake Pipe Color / Finish: Polished Intake Pipe Inlet Length: 55 in (1397 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 2.5 in (64 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 55 in (1397 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 2.5 in (64 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-201DK Street Legal In All US States: Yes Title: AEM AEM-21-403P AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 7.6 lb (3.5 kg) Notes: California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS) California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | 10 lbs | N/A | 11.4 lbs | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | 20.25 × 12.25 × 12.25 in | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
Copyright 2023 © Car Tuner Pro LLC | All right reserved. Powered by Auto Parts Authority.
Download App on Mobile (Coming Soon)
