Description | The Banks Power Ram-Air Cold-Air Intake System Oiled Filter Chevrolet | GMC LLY 6.6L 2004-2005 for your 2004-2005 Chevrolet Silverado 3500 is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Induction AEM Cold Air Intake System Acura 3.2L V6 for your 2002-2003 Acura TL is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Induction AEM Cold Air Intake System Acura Integra 1994-2001 1.8L 4-Cyl for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Induction AEM Cold Air Intake System Acura CL 2003 3.2L V6 Manual for your 2003 Acura CL is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | Looking to add a subtle yet aggressive look to your Genesis G70 3.3T? Would you also like a boost in performance to complement this aggressive new appearance? You're in the right place. The Velossa Tech dual BIG MOUTH is the go-to mod for any induction setup (works with your stock or aftermarket cold air intake). | The AEM Induction AEM Cold Air Intake System Acura ILX 2016-2017 2.4L 4-Cyl for your 2016-2019 Acura ILX is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. |
Content | Banks Ram-Air Superiority. Flowbench developed, dyno proven cold-air intake with enclosed housing improves flow up to 57 percent. Increases power and fuel economy. Reduces exhaust gas temps and sooty, Black smoke. Passes the test. Again and again. Others build and ship without testing. Not Banks. Our Ram-Air Intakes start out as CAD software prototypes and are put through flow simulations. The design is refined until the simulation shows optimal performance. Then a hardware prototype is made and the design is validated on a flowbench. After that comes dyno testing and on-vehicle testing. It takes a superior design to pass all those tests! Filter on a stick: a joke that's not funny. A filter on a stick is a bad joke. It's wide-open to hot underhood engine air, and there's no power in hot air! Ram-Air houses a giant lifetime filter in an enclosed cold-air box, which inhales cool, dense outside air - more than Banks competitors and up to 57 percent more than stock - for more power and mileage, lower EGTs and less smoke. And it's designed to not cause fault or error codes. Bellows, too? Very exclusive. Banks Ram-Air is the only aftermarket intake with bellows. This accommodates engine movement and prevents component damage for longer service life. New Filter Options! Choose from the traditional red, Oiled filter or the all-new black, Dry filter. Details: Extensively tested and validated Enclosed housing keeps out hot, power-robbing engine air Inhales cooler outside air for more power and MPG Giant filter maximizes high-flow filtration Helps engine run cooler Accommodates engine movement Prevents component damage Extends service life and requires fewer cleanings 5-year Limited Warranty (Filter: Lifetime Limited Warranty) Gain up to +39 hp/+69 lb-ft Reduces exhaust gas temps (EGTs) and smoke Outflows stock and competitors up to 57 percent Oiled Air Filter Element Emissions compliant: CARB EO D-161-81 Ram-Air Cold-Air Intake System, Oiled Filter for use with 2004-2005 Chevy/GMC 6.6L, LLY
| The AEM 21-419R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura CL and TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hoses as well as a replacement water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-419R vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Air Filter Large End Diameter: 6 in (152 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 3 in (76 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3 in (76 mm) Air Filter Washable: Yes CARB EO Number: D-670-15 Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 7 Color: Red Coupler Color/Finish: Not Applicable Couplers Included: None Intake Pipe Color / Finish: Red Intake Pipe Inlet Length: 55 in (1397 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3 in (76 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 55 in (1397 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3 in (76 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-203DK Street Legal In All US States: Yes Title: AEM AEM-21-419R AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 6.6 lb (3 kg) Notes:
w/o Fog Lights; California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Red (CAS) | The AEM 21-403R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura Integra models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement engine breather hose and water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-403R vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Filter Large End Diameter: 6 in (152 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 2.5 in (64 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 2.5 in (64 mm) Air Filter Washable: Yes CARB EO Number: D-670-15 Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 7 Color: Red Coupler Color/Finish: Not Applicable Couplers Included: None Intake Pipe Color / Finish: Red Intake Pipe Inlet Length: 55 in (1397 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 2.5 in (64 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 55 in (1397 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 2.5 in (64 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-201DK Street Legal In All US States: Yes Title: AEM AEM-21-403R AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 7.6 lb (3.5 kg) Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Notes: California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Red (CAS)
California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Red (CAS) | The AEM 21-509P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura CL Type-S models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable mirror-polished powder coated finish and was developed to accommodate the engine's factory emissions control devices. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-509P vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Air Filter Large End Diameter: 6 in (152 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 3 in (76 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3 in (76 mm) Air Filter Washable: Yes CARB EO Number: D-670-15 Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 5 Color: Polished Coupler Color/Finish: Not Applicable Couplers Included: None Intake Pipe Color / Finish: Polished Intake Pipe Inlet Length: 41 in (1041 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3 in (76 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 41 in (1041 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3 in (76 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-203DK Street Legal In All US States: Yes Title: AEM AEM-21-509P AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 7 lb (3.2 kg) Notes: California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS)
California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS) | Looking to add a subtle yet aggressive look to your Genesis G70 3.3T? Would you also like a boost in performance to complement this aggressive new appearance? You're in the right place. The Velossa Tech dual BIG MOUTH is the go-to mod for any induction setup (works with your stock or aftermarket cold air intake).
Our NEW Generation 4 BIG MOUTH ram air intake snorkels feature removable flare/inlets and allow you to truly customize your intake in ways never before seen! By choosing new colors, the sky is the limit! With the ease of removing the flare by unscrewing 4 sets screws, you can change the color of your BIG MOUTH to get the look that fits your self-expression. Generation 4 is a patent-pending feature that will change the way we present our cars to the world, Velossa Tech is proud to be able to offer this new innovative feature. Being able to replace a flare with ease is now a reality. Replacing flares is not just easy, but affordable!
NOTE: Generation 4 flares are not backward compatible with Generation 3 bodies.
The BIG MOUTH was developed for better overall mass air flow for stock, tuned cars, or highly modified engines, you also have the ability to customize the color of the inlet flare and body. This is truly a unique piece in that it allows you to get the performance benefits of a properly engineered ram duct and have the aesthetic appeal of your liking!!
It will bolt right directly onto the inlet cowl and feed your aftermarket or stock airbox on your Genesis G70 3.3T, in fact, it will greatly improve the performance of your stock or aftermarket intake setup.
Designed in-house right here in the USA with the latest aerospace flow path engineering and design techniques, and backed by hours and hours of R&D, fitment testing, and real-world driving, we are sure you will fall in love with American-made quality and engineering.
FEATURES
Maximum performance design, optimized convergent duct
Finished SMOOTH for MAXIMUM air velocity
28 color options to choose from
All hardware included
OEM fitment
Two-layer UV protective coating for sun protection against color fade
No permanent modification is necessary
No tune necessary (although beneficial if you tune with the BIG MOUTH)
Made in the USA | The AEM 21-784C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura ILX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-784C vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.25 in (133 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Shape: Round Air Filter Washable: Yes CARB EO Number: D-670-24 Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 5 Coupler Color/Finish: Black Couplers Included: 2 Estimated Horsepower Gain: 15 HP @ 5900 RPM Horse Power Increase: 15 HP Intake Pipe Color / Finish: Gunmetal Gray Intake Pipe Material: Aluminum Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-209DK RPM: 5900 Street Legal In All US States: See Vehicle Applications Title: AEM AEM-21-784C AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 10 lb (4.5 kg) Notes: California Air Resources Board Exempt: Yes; CARB EO: D-670-24; AEM - Metal Intake System; Gunmetal Gray (CAS)
California Air Resources Board Exempt: No; AEM - Metal Intake System; Gunmetal Gray (CAS),California Air Resources Board Exempt: Yes; CARB EO: D-670-24; AEM - Metal Intake System; Gunmetal Gray (CAS) |
Additional information |
|
Make |
Acura
|
Model |
TL
|
Sub Model |
Type S
|
|
|
Make |
Acura
|
Model |
|
Sub Model |
Type S
|
|
Weight |
10 lbs |
Make |
Genesis
|
Model |
G70
|
Sub Model |
3.3T
|
Body Color |
Beige, Black, Blue, Bright Green, Bright Yellow, Brown, Dark Gray, Dark Purple, Forest Green, Fuscia, Gold, Grabber Blue, Gray, Hot Pink, Leaf Green, Molten Orange, Neon Glow, Nitrous Blue, Off White, Orange, Performance Blue, Purple, Red, Silver, Violet, White, Yellow
|
Flare Color |
Beige, Black, Blue, Bright Yellow, Brown, Dark Gray, Dark Purple, Forest Green, Fuscia, Gold, Grabber Blue, Gray, Green, Hot Pink, Leaf Green, Molten Orange, Neon Glow, Nitrous Blue, Off White, Orange, Performance Blue, Purple, Red, Silver, Violet, White, Yellow
|
Brand |
Velossa Tech
|
|
|