Description | The Banks Power Ram-Air Cold-Air Intake System Dry Filter Chevrolet | GMC LML 6.6L 2013-2014 for your 2013-2014 Chevrolet Silverado 3500 is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Induction AEM Cold Air Intake System for your 2013-2014 Acura ILX is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Induction AEM Cold Air Intake System Acura 3.2L V6 for your 2001-2003 Acura CL is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Induction AEM Cold Air Intake System Acura 3.2L V6 for your 2002-2003 Acura TL is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Induction AEM Cold Air Intake System Acura 3.2L V6 for your 2001-2003 Acura CL is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. | The AEM Induction AEM Cold Air Intake System Acura 3.2L V6 for your 2002-2003 Acura TL is a great way to increase horsepower and torque gains by replacing your restricted factory air intake. |
Content | Banks Ram-Air Superiority. Flowbench developed, dyno proven cold-air intake with enclosed housing improves flow up to 35 percent. Increases power and fuel economy. Reduces exhaust gas temps and sooty, Black smoke. Testing, testing and more testing. Banks Ram-Air Intake Systems are tested and proven. They start out as CAD software prototypes and are put through flow simulations. After a hardware prototype is made, it's tested on a flowbench. Then it's tested on the vehicle. And finally, Banks density-tests the Ram-Air against stock and many competitors. Proven design. Proven performance. Thanks to its enclosed cold-air housing, huge inlet, giant dome-shaped lifetime filter and streamlined design, Banks Ram-Air Intake maximizes the flow of cool, dense air to the engine for greater power and fuel economy. It flows 35 percent better than stock. And delivers greater air density to the turbo's inlet than the stock system and every competitor tested! It's all about density. And Banks Ram-Air Intakes deliver. The harder you work your truck, the more Banks Ram-Air Intake improves power and fuel economy! Longer service life, too. An aftermarket exclusive: with 5 inch bellows, Banks Ram-Air accommodates engine movement, which protects the components and extends service life. What's more, Ram-Air is designed to not cause fault or error codes. New Filter Options! Choose from the traditional red, Dry filter or the all-new black, Dry filter. Details: Extensively tested and validated Enclosed housing keeps out hot, power-robbing engine air Inhales cooler outside air for more power and MPG Giant filter maximizes high-flow filtration Helps engine run cooler Accommodates engine movement Prevents component damage Extends service life and requires fewer cleanings 5-year Limited Warranty (Filter: Lifetime Limited Warranty) Outflows stock and competitors up to 35 percent Reduces exhaust gas temps (EGTs) Exclusive 5 inch bellows prevents component damage Cooler temps Cleaner-running engine DRY Air Filter Element Emissions compliant: CARB EO D-161-102 Ram-Air Cold-Air Intake System, Dry Filter for use with 2013-2014 Chevy/GMC 6.6L, LML
| The AEM 21-716P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic SI and Acura ILX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated above the driver's side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crankcase vent tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-716P vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 1.5 in (38 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3 in (76 mm) Air Filter Washable: Yes CARB EO Number: D-670-21 Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 11 Coupler Color/Finish: Not Applicable Couplers Included: None Estimated Horsepower Gain: 8 HP @ 7000 RPM Horse Power Increase: 8 HP Intake Pipe Color / Finish: Polished Intake Pipe Inlet Length: 24 in (610 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3 in (76 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 24 in (610 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3 in (76 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-203DOSK RPM: 7000 Street Legal In All US States: See Vehicle Applications Title: AEM AEM-21-716P AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 8.3 lb (3.7 kg) Notes: California Air Resources Board Exempt: Yes; CARB EO: D-670-21; AEM - Metal Intake System; Polished (CAS)
California Air Resources Board Exempt: Yes; CARB EO: D-670-21; AEM - Metal Intake System; Polished (CAS) | The AEM 21-419C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura CL and TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hoses as well as a replacement water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-419C vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Air Filter Large End Diameter: 6 in (152 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 3 in (76 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3 in (76 mm) Air Filter Washable: Yes CARB EO Number: D-670-15 Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 7 Color: Gunmetal Gray Coupler Color/Finish: Not Applicable Couplers Included: None Intake Pipe Color / Finish: Gunmetal Gray Intake Pipe Inlet Length: 55 in (1397 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3 in (76 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 55 in (1397 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3 in (76 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-203DK Street Legal In All US States: Yes Title: AEM AEM-21-419C AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 6.2 lb (2.8 kg) Notes:
California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS) | The AEM 21-419P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura CL and TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hoses as well as a replacement water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-419P vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Air Filter Large End Diameter: 6 in (152 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 3 in (76 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3 in (76 mm) Air Filter Washable: Yes CARB EO Number: D-670-15 Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 7 Color: Polished Coupler Color/Finish: Not Applicable Couplers Included: None Intake Pipe Color / Finish: Polished Intake Pipe Inlet Length: 55 in (1397 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3 in (76 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 55 in (1397 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3 in (76 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-203DK Street Legal In All US States: Yes Title: AEM AEM-21-419P AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 6.2 lb (2.8 kg) Notes:
w/o Fog Lights; California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS) | The AEM 21-419P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura CL and TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hoses as well as a replacement water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-419P vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Air Filter Large End Diameter: 6 in (152 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 3 in (76 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3 in (76 mm) Air Filter Washable: Yes CARB EO Number: D-670-15 Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 7 Color: Polished Coupler Color/Finish: Not Applicable Couplers Included: None Intake Pipe Color / Finish: Polished Intake Pipe Inlet Length: 55 in (1397 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3 in (76 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 55 in (1397 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3 in (76 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-203DK Street Legal In All US States: Yes Title: AEM AEM-21-419P AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 6.2 lb (2.8 kg) Notes:
California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Polished (CAS) | The AEM 21-419C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura CL and TL models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hoses as well as a replacement water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-419C vehicle applications to determine the legal status for each vehicle. AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly. Features Air Box Included: No Air Filter Color: Red Air Filter Height: 5.125 in (130 mm) Air Filter Large End Diameter: 6 in (152 mm) Air Filter Material: Non-woven Synthetic Air Filter Outlet Length: 3 in (76 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3 in (76 mm) Air Filter Washable: Yes CARB EO Number: D-670-15 Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 7 Color: Gunmetal Gray Coupler Color/Finish: Not Applicable Couplers Included: None Intake Pipe Color / Finish: Gunmetal Gray Intake Pipe Inlet Length: 55 in (1397 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3 in (76 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 55 in (1397 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3 in (76 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: No Filter Oil Required Package Material: Paperboard Package Type: Box Product Style: AEM Cold Air Intake System Prop 65 (C, R or CR): CR Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov Prop 65 Warning Label: https://www.knfilters.com/images/l/prop65.jpg Prop 65 Yes/No: Yes Replacement Filter: 21-203DK Street Legal In All US States: Yes Title: AEM AEM-21-419C AEM Cold Air Intake System TUV Approved (Europe): No Warranty: Limited Lifetime Weight: 6.2 lb (2.8 kg) Notes:
w/o Fog Lights; California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (CAS) |