| Content | Enhance your Audi A5 Coupe 4WD by adding the ARMYTRIX Super Sport Stainless Steel Exhaust System. This system will increase power, reduce weight, and improve sound. This precision-made performance system delivers more power, especially in the low and mid rev range, the effect on the sound is significant, adding a deep resonant sporty sound, but at the same time neutralizes the annoying frequencies in the most critical rpm range. Complete the look with a set of four sporty chrome polished silver tailpipes. ARMYTRIX exhaust systems differ from other brand' exhaust systems with their unique "Throttle Pedal Sensor and Engine RPM Signal Auto Functions". Through this system ARMYTRIX offers car owners a better launch-start without losing backpressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase air flow for better performance (hp & torque gained) and sound. Car owners can set their own timing for valves to automatically open and close by engine rpm and how deep they press the gas pedal. It' a new innovative system that brings your car to a different level. With the ARMYTRIX you are not getting just an exhaust system, you are getting a driving system unlike any you have experienced before. When car owners turn on the race mode (valves opened), the gas goes through the section of straight pipes. This is where you get the incredible race sound and performance gain. In full throttle and it' straight pipe all the way, which means you will be expecting the LOUDEST sound performance you've ever hear! Includes: Front pipe Mid pipe Y Pipe Valvetronic mufflers Wireless Remote control module Features: Stainless Steel Quad Chrome Silver Tips 3 Mode Valve System to control exhaust sound Notes: ARMYTRIX wireless valvetronic wiring is a plug-and-play system, no cutting, alteration or damage will be done to the factory settings. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. ARMYTRIX VALVETRONIC: HOW IT WORKS- BRIEF OVERVIEW:As an ARMYTRIX fan, customer, or potential customer, you have likely heard of Valvetronic. It's one of the prominent selling features of ARMYTRIX exhaust systems and has shifted the entire exhaust industry towards adopting similar technology in all exhaust systems. The whole point of the Valvetronic system is to give you an option for how loud you want your car to be. If you leave early in the morning for work, you probably don't want your car to be excessively loud, as it will upset your neighbors. Once you're out on the open road or shredding a canyon road, you want to hear those awesome noises your car makes. The Valvetronic system allows you to switch between being quiet and being loud with the push of a button via the included remote or through the smartphone application; this works by tapping into a vacuum source on your engine and connecting it to the control module. When you press the button on the remote or smartphone application, you are communicating with the OBDII module via Bluetooth. This OBDII module tells the exhaust valve module to allow the engine vacuum to open or close the exhaust valve. You can also set the exhaust valve module to an automatic mode which will open/close the exhaust valve based on predetermined RPM range or throttle position. Aside from getting a brutal sound with the Valvetronic system open, you can also gain power, especially if your car is turbocharged. Depending on the car, modifications, and tune you have, the valve being open will also the exhaust gas to flow more freely, as it does not have to pass through any muffler. If your vehicle is turbocharged, you may see a slight increase in boost pressure depending if you are running an open or closed boost cycle, resulting in more horsepower.
| HKS Hi Power Exhaust Acura Integra GS, LS, RS Hatchback 90-91 Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Depending on the application, Hi-Power muffler tips are 96mm, 115mm and 120mm in diameter, piping diameter ranges from 55mm to 95mm. Special Edition HKS Carbon Titanium Hi-Power Exhaust systems are exclusively available for certain popular applications. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping. Hatchback Only. Tip Diameter: 96mm Piping Diameter: 55mm NOTE: picture is for representation only, actual product may vary.
| Description: Super Ti is Fujitsubo's premier exhaust system. It features full titanium construction, large diameter mandrel piping, and high flow muffler. Each Super Ti kit is developed for optimum horsepower while greatly reducing weight. For a Mitsubishi EVO 9 application the Super Ti was 60% lighter in weight than OE, a difference of 21 lbs. The reduced weight will benefit all aspects of vehicle performance including acceleration, braking, and handling. The goal in development is to increase power throughout the RPM range with an emphasis on high RPM power. All components are made of titanium from tip, muffler, resonators, piping, brackets, and hangers. Super lightweight Titanium construction with a straight through muffler design. Developed to be high flow with an aggressive exhaust note. The compact round shaped muffler and large diameter tip are designed to pursue exhaust efficiency and at the same time reduce sound to acceptable limits. Slashed and straight tip designs are available to offer a sharp feeling. Features: Order production Exit shape:100 slash (titanium, RL) Pipe diameter:60.5 Maximum output:Stock: 196.8kw (267.6ps) / 7200rpm - Fujitsubo: 201.8kw (274.4ps) / 7400rpm Maximum torque:Stock: 282.2Nm (28.8kgm) / 6160rpm - Fujitsubo: 283.2Nm (28.9kgm) / 6380rpm Weight:Stock: 19.8kg - Fujitsubo: 10.8kg Volume idling:Stock: 64dB - Fujitsubo: 71dB Middle RPM Sound:Stock: 84dB - Fujitsubo: 85dB High RPM Sound:Stock: 93dB - Fujitsubo: 97dB Mid RPM Acceleration Sound:Stock: 101dB - Fujitsubo: 111dB Note: Images are for illustration purpose only. Actual product may vary.
| HKS Hi Power Exhaust Acura RSx Type S Off Road 02-04 Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Depending on the application, Hi-Power muffler tips are 96mm, 115mm and 120mm in diameter, piping diameter ranges from 55mm to 95mm. Special Edition HKS Carbon Titanium Hi-Power Exhaust systems are exclusively available for certain popular applications. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping. Off-Road Use Only - 65mm Piping for Turbocharged Applications
| Description: The RM-01A was developed for gymkhana, dirt trial, and other competition spec vehicles where mid to high RPM power is crucial. Especially for race classes with strict modification restrictions; the lightweight benefits of the RM-01A can truly be realized. Improved acceleration, response, braking, cornering, reduced tire wear, and all other vehicle behaviors are influenced by weight reduction. Due to all the light weight materials and advanced construction the RM-01A is 50% lighter than OE for most applications. The RM-01A will decrease lap times with improved power and reduced weight. The main pipe and silencer body are 1.0mm, 1.2mm and 1.5mm (Except for certain models) thick SUS304 which is light weight and guaranteed to be durable. All unnecessary weight has been removed from all components, and thicknesses of materials have been selected to produce the ultimate performance exhaust. Features: Exit shape:89 straight (with holes) Pipe diameter:60.5 Minimum ground clearance:Roof High 1392Mm (vehicle inspection 1380Mm) measuring drive, 129 mm in the intermediate pipe section (1490Mm behind the front axle) Intermediate acceleration:Stock: 3.4 seconds - Fujitsubo: 3.3 seconds Maximum output:Stock: 141.4kw (192.3ps) / 7580rpm - Fujitsubo: 144.5kw (196.5ps) / 7710rpm Maximum torque:Stock: 186.2Nm (19.0kgm) / 6790rpm - Fujitsubo: 189.1Nm (19.3kgm) / 6600rpm Weight:Stock: 14.1kg - Fujitsubo: 9.5kg Volume idling:Stock: 64dB - Fujitsubo: 70dB Middle RPM Sound:Stock: 74dB - Fujitsubo: 83dB High RPM Sound:Stock: 85dB - Fujitsubo: 89dB Mid RPM Acceleration Sound:Stock: 99dB - Fujitsubo: 103dB Note: Images are for illustration purpose only. Actual product may vary.
| HKS Hi Power Exhaust Acura Integra GSR Hatchback 94-99 Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Depending on the application, Hi-Power muffler tips are 96mm, 115mm and 120mm in diameter, piping diameter ranges from 55mm to 95mm. Special Edition HKS Carbon Titanium Hi-Power Exhaust systems are exclusively available for certain popular applications. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping. Hatchback Only. Tip Diameter: 96mm Piping Diameter: 55mm NOTE: picture is for representation only, actual product may vary.
|
