Description | The ARMYTRIX Valvetronic Exhaust System Audi RS4 | RS5 Avant/Sportback B9 2.6 V6 Turbo 2017+ for your 2017-2023 Audi RS4 is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Buddy Club Spec II Catback Exhaust System Acura RSX 2002-2006 for your 2002-2006 Acura RSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The HKS Hi Power Exhaust Acura Integra GS LS RS Hatchback 92-93 for your 1992-1993 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fabspeed Maxflo Performance Catback Exhaust with Tips Acura NSX 2017-2022 for your 2016-2022 Acura NSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo RM-01A Exhaust Honda Integra Type R 2001-2005 for your 2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The DC Sports Stainless Exhaust System Single Canister Catback Acura Integra 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. |
Content | Enhance your B9 RS4 | RS5 Avant/Sportback by adding the ARMYTRIX Stainless Steel Exhaust System. This system will increase power, reduce weight, and improve sound. This precision-made performance system delivers more power, especially in the low and mid rev range, the effect on the sound is significant, adding a deep resonant sporty sound, but at the same time neutralizes the annoying frequencies in the most critical rpm range. ARMYTRIX exhaust systems differ from other brand's exhaust systems with their unique "Throttle Pedal Sensor and Engine RPM Signal Auto Functions". Through this system ARMYTRIX offers car owners a better launch-start without losing backpressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase air flow for better performance (hp & torque gained) and sound. Car owners can set their own timing for valves to automatically open and close by engine rpm and how deep they press the gas pedal. It's a new innovative system that brings your car to a different level. With the ARMYTRIX you are not getting just an exhaust system, you are getting a driving system unlike any you have experienced before. When car owners turn on the race mode (valves opened), the gas goes through the section of straight pipes. This is where you get the incredible race sound and performance gain. In full throttle and it's straight pipe all the way, which means you will be expecting the LOUDEST sound performance you'll ever hear! Includes: Front Pipe (AU94R-FL2+AU94R-FR) Mid-Pipe (AU94R-M) Valvetronic Mufflers (AU94R-EVML+AU94R-E Note: Dual Chrome Silver Tips (2XS45C)
| The Buddy Club Spec II Catback Exhaust System is specially designed system for competition use only. Its simple straight thru design creates an increase of exhaust gas velocity in order to improve efficiency. This exhaust uses a middle silencer (resonator) on the main pipe to help maintain torque in the low to mid speed range. All mufflers are made with SUS304 stainless steel, 1mm is used for main pipe. and the ultra 0.8mm is used for main silencer combine with 76.2mm (3") exhaust piping. This combination creates a super light weight muffler and turbo setup to maintain broad power band. Inner silencer are included with the kit. Features: Direct Bolt On Install Light Weight and Highly Efficient Made of SUS304 Stainless Steel Efficient Middle Resonator Low Throaty Tone Note: Pictures are used for marketing purposes only, actual product may vary.
| HKS Hi Power Exhaust Acura Integra GS, LS, RS Hatchback 92-93 Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Depending on the application, Hi-Power muffler tips are 96mm, 115mm and 120mm in diameter, piping diameter ranges from 55mm to 95mm. Special Edition HKS Carbon Titanium Hi-Power Exhaust systems are exclusively available for certain popular applications. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping. Hatchback Only. Tip Diameter: 96mm Piping Diameter: 55mm NOTE: picture is for representation only, actual product may vary.
| For over 20 years, Fabspeed has been engineering and manufacturing the world's finest stainless steel high performance exhaust systems and components, air intake products, ECU tuning, and more, specifically-tailored for high-end sports cars and exotics. From Porsche to McLaren, our expertise is unmatched and it shows in everything that we do. Our dyno-proven performance products provide an exhilarating driving experience and are backed by a Limited Lifetime Warranty. Features: Direct replacement bolt-on precision crafted mandrel pipes to replace restrictive OEM heavy Acura valved exhaust No check engine light guaranteed. Complies with emissions and warranty Increased sportscar sound and Turbo spool. Save 19 pounds and 8.5 kg versus stock NSX valved exhaust Precision manufactured in USA using HAAS CNC, FLOW WATERJET, and UNISON LTD mandrel bending equipment System comes with Deluxe quad tips ready to install. Choose from Polished or Black Chrome. The tips beautifully fill in the rear bumper chrome valence surround. So much better than the factory raw pipes. YouTube An error occurred. Unable to execute JavaScript. YouTube An error occurred. Unable to execute JavaScript.
| Description: The RM-01A was developed for gymkhana, dirt trial, and other competition spec vehicles where mid to high RPM power is crucial. Especially for race classes with strict modification restrictions; the lightweight benefits of the RM-01A can truly be realized. Improved acceleration, response, braking, cornering, reduced tire wear, and all other vehicle behaviors are influenced by weight reduction. Due to all the light weight materials and advanced construction the RM-01A is 50% lighter than OE for most applications. The RM-01A will decrease lap times with improved power and reduced weight. The main pipe and silencer body are 1.0mm, 1.2mm and 1.5mm (Except for certain models) thick SUS304 which is light weight and guaranteed to be durable. All unnecessary weight has been removed from all components, and thicknesses of materials have been selected to produce the ultimate performance exhaust. Features: Exit shape:89 straight (with holes) Pipe diameter:60.5 Minimum ground clearance:Roof High 1392Mm (vehicle inspection 1380Mm) measuring drive, 129 mm in the intermediate pipe section (1490Mm behind the front axle) Intermediate acceleration:Stock: 3.4 seconds - Fujitsubo: 3.3 seconds Maximum output:Stock: 141.4kw (192.3ps) / 7580rpm - Fujitsubo: 144.5kw (196.5ps) / 7710rpm Maximum torque:Stock: 186.2Nm (19.0kgm) / 6790rpm - Fujitsubo: 189.1Nm (19.3kgm) / 6600rpm Weight:Stock: 14.1kg - Fujitsubo: 9.5kg Volume idling:Stock: 64dB - Fujitsubo: 70dB Middle RPM Sound:Stock: 74dB - Fujitsubo: 83dB High RPM Sound:Stock: 85dB - Fujitsubo: 89dB Mid RPM Acceleration Sound:Stock: 99dB - Fujitsubo: 103dB Note: Images are for illustration purpose only. Actual product may vary.
| Like all of DC Sports engine breathing products, DC Sports Single Canister exhaust systems are dyno tuned and tested to outperform all comparable systems on the market. Our Single Canister systems feature a polished round barrel-style canister and a straight-cut, four-inch tip with rolled DC Sports logo. Due to certain fitment requirements and routing specifications, DC Sports manufactures a single canister, dual tip exhaust system for the Nissan 350Z, Acura NSx and other select applications. Due to certain fitment requirements and routing specifications, DC Sports manufactures a single canister, dual tip exhaust system for the Nissan 350Z, Acura NSx and other select applications. These Single Canister, dual tip systems feature a large, transverse-mounted polished oval canister with dual straight-cut, four-inch tips with rolled DC Sports logos so there is no mistaking whether you have the best exhaust on the market.Fitment: Acura Integra 1994-2001
|
Additional information |
|
|
|
Brand |
Fabspeed
|
Make |
Acura
|
Model |
NSX
|
Year |
2016, 2017, 2018, 2019, 2020, 2021, 2022
|
|
|
|