| Content | Enhance your BMW X3 | X4 by adding the ARMYTRIX Stainless Steel Exhaust System. This system will increase power, reduce weight, and improve sound. This precision-made performance system delivers more power, especially in the low and mid rev range, the effect on the sound is significant, adding a deep resonant sporty sound, but at the same time neutralizes the annoying frequencies in the most critical rpm range. ARMYTRIX exhaust systems differ from other brand's exhaust systems with their unique "Throttle Pedal Sensor and Engine RPM Signal Auto Functions". Through this system ARMYTRIX offers car owners a better launch-start without losing backpressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase air flow for better performance (hp & torque gained) and sound. Car owners can set their own timing for valves to automatically open and close by engine rpm and how deep they press the gas pedal. It's a new innovative system that brings your car to a different level. With the ARMYTRIX you are not getting just an exhaust system, you are getting a driving system unlike any you have experienced before. When car owners turn on the race mode (valves opened), the gas goes through the section of straight pipes. This is where you get the incredible race sound and performance gain. In full throttle and it's straight pipe all the way, which means you will be expecting the LOUDEST sound performance you'll ever hear! Features: Fits non-OPF B48 Engine Model Front Pipe (BMG02-F) Mid Pipe (BMG02-M1+BMG02-M2) Valvetronic Mufflers (BMG02-VM) Wireless Remote Control Kits (OWRC) Dual Chrome Silver Tips (2XS38C) ARMYTRIX VALVETRONIC: HOW IT WORKS- BRIEF OVERVIEW:As an ARMYTRIX fan, customer, or potential customer, you have likely heard of Valvetronic. It's one of the prominent selling features of ARMYTRIX exhaust systems and has shifted the entire exhaust industry towards adopting similar technology in all exhaust systems. The whole point of the Valvetronic system is to give you an option for how loud you want your car to be. If you leave early in the morning for work, you probably don't want your car to be excessively loud, as it will upset your neighbors. Once you're out on the open road or shredding a canyon road, you want to hear those awesome noises your car makes. The Valvetronic system allows you to switch between being quiet and being loud with the push of a button via the included remote or through the smartphone application; this works by tapping into a vacuum source on your engine and connecting it to the control module. When you press the button on the remote or smartphone application, you are communicating with the OBDII module via Bluetooth. This OBDII module tells the exhaust valve module to allow the engine vacuum to open or close the exhaust valve. You can also set the exhaust valve module to an automatic mode which will open/close the exhaust valve based on predetermined RPM range or throttle position. Aside from getting a brutal sound with the Valvetronic system open, you can also gain power, especially if your car is turbocharged. Depending on the car, modifications, and tune you have, the valve being open will also the exhaust gas to flow more freely, as it does not have to pass through any muffler. If your vehicle is turbocharged, you may see a slight increase in boost pressure depending if you are running an open or closed boost cycle, resulting in more horsepower.
| The RM-01A was developed for gymkhana, dirt trial, and other competition spec vehicles where mid to high RPM power is crucial. Especially for race classes with strict modification restrictions; the lightweight benefits of the RM-01A can truly be realized. Improved acceleration, response, braking, cornering, reduced tire wear, and all other vehicle behaviors are influenced by weight reduction. Due to all the light weight materials and advanced construction the RM-01A is 50% lighter than OE for most applications. The RM-01A will decrease lap times with improved power and reduced weight. The main pipe and silencer body are 1.0mm, 1.2mm and 1.5mm (Except for certain models) thick SUS304 which is light weight and guaranteed to be durable. All unnecessary weight has been removed from all components, and thicknesses of materials have been selected to produce the ultimate performance exhaust. Features: Quality Stainless Steel Construction Bolt-On Installation Improved Throttle Response Improved Exhaust Note Note(s): Pictures Used For Marketing Purposes Only, Actual Product May Vary. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser.
| HKS Hi Power Exhaust Acura Integra GS, LS, RS Hatchback 90-91 Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Depending on the application, Hi-Power muffler tips are 96mm, 115mm and 120mm in diameter, piping diameter ranges from 55mm to 95mm. Special Edition HKS Carbon Titanium Hi-Power Exhaust systems are exclusively available for certain popular applications. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping. Hatchback Only. Tip Diameter: 96mm Piping Diameter: 55mm NOTE: picture is for representation only, actual product may vary.
| HKS Hi Power Exhaust Acura Integra GSR Hatchback 94-99 Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Depending on the application, Hi-Power muffler tips are 96mm, 115mm and 120mm in diameter, piping diameter ranges from 55mm to 95mm. Special Edition HKS Carbon Titanium Hi-Power Exhaust systems are exclusively available for certain popular applications. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping. Hatchback Only. Tip Diameter: 96mm Piping Diameter: 55mm NOTE: picture is for representation only, actual product may vary.
| Like all of DC Sports engine breathing products, DC Sports Single Canister exhaust systems are dyno tuned and tested to outperform all comparable systems on the market. Our Single Canister systems feature a polished round barrel-style canister and a straight-cut, four-inch tip with rolled DC Sports logo. Due to certain fitment requirements and routing specifications, DC Sports manufactures a single canister, dual tip exhaust system for the Nissan 350Z, Acura NSx and other select applications. Due to certain fitment requirements and routing specifications, DC Sports manufactures a single canister, dual tip exhaust system for the Nissan 350Z, Acura NSx and other select applications. These Single Canister, dual tip systems feature a large, transverse-mounted polished oval canister with dual straight-cut, four-inch tips with rolled DC Sports logos so there is no mistaking whether you have the best exhaust on the market.Fitment: Acura Integra 1994-2001
| In the N-1 Endurance Race, efficiency is everything. With that in mind, the N-1 exhaust systems were born to satisfy the want for quick throttle response and to effectively handle the rigorous demands of high-horsepower engines. The pipes were engineered with the aid of sophisticated CAD systems to develop the straightest possible lines and least number of bends. The straight-through canister projects from the car at an angle, which helps smooth the exhaust flow. The canister is built from SUS 304 stainless steel and features a 115mm tip with aggressive style. The Super Silencer is included on selected models, which can reduce noise levels by up to 7 decibels. The N-1 Series Mufflers are available for both NA (naturally aspirated) and turbo-charged cars. N1 exhaust must be shipped as an oversize box, therefore shipping will be quoted at the time of sale. Partial shipping is added of 90lb DIM weight. In additional shipping charges we will contact you.
|
| Additional information |
|
|
|
|
|
|
