Price Match
AWE Tuning Cat-Back Exhaust System For Audi S5
$1,895.00
The AWE Tuning Touring Edition Exhaust System w/ 102mm Diamond Black Tips Audi S5 Coupe 3.0T 2013-2017 for your 2013-2017 Audi S5 is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system.
Did you like this product? Add to favorites now and follow the product.
Add to WishlistAlready In Wishlist
Add to Wishlist
Description
Welcome to the finest catback exhaust for the B7 Audi S4 on the market. The AWE Touring Edition Exhaust for the B7 S4 is a direct bolt on catback system that not only transforms the rear end of the car with its menacing quad tips, but also turns heads with a deep muscluar bass note. Each cat back system features an H-Pipe crossover tube at the front to maximize exhaust scavenging for maximum power, as well as to take a harsh edge off the exhaust sounds. Tubing diameter for the entire system is 2.25″. This is a deep bass tone, no matter how you cut it. Dyno proven for legitimate power gains of 14.2 hp and 14.8 lb-ft torque corrected to the crank on our in house Mustang AWD dynamometer, the B7 S4 Performance Exhaust is a must have for any B7 enthusiast. Features: The ultimate exhaust solution for the 3.0T Deep, sophisticated V8 tone Dyno-verified gains of 11 hp and 12 lb-ft of torque at the wheels Aggressive quad tip design Available with Chrome Silver or Diamond Black tips No Check Engine Light ? Guaranteed Perfect Fitment ? Guaranteed Features AWE’s Lifetime Warranty Specifications: 180 Technology: Yes 50 State Legal : Yes Edition: Touring Edition Fit Guarantee : Yes Hardware Included: Yes Material: T304L Stainless Steel Muffler Quantity: 3 No CEL Guarantee : Yes System Type: Cat Back Tip Diameter: 102 Tip Diameter: 4 Tip Finish: Diamond Black Tip Qty: 4 Tune Required: No Valves: No
Additional information
| Brand | |
|---|---|
| Make | |
| Model | |
| Sub Model | |
| Year | 2013, 2014, 2015, 2016, 2017 |
Quick Comparison
| Settings | AWE Tuning Cat-Back Exhaust System For Audi S5 remove | HKS Cat-Back Exhaust System For Acura Integra remove | HKS Cat-Back Exhaust System For Acura RSX remove | Fujitsubo Cat-Back Exhaust System For Acura Integra remove | Buddy Club Cat-Back Exhaust System For Acura Integra remove | Fujitsubo Cat-Back Exhaust System For Acura RSX remove | ||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | AWE Tuning Cat-Back Exhaust System For Audi S5 remove | HKS Cat-Back Exhaust System For Acura Integra remove | HKS Cat-Back Exhaust System For Acura RSX remove | Fujitsubo Cat-Back Exhaust System For Acura Integra remove | Buddy Club Cat-Back Exhaust System For Acura Integra remove | Fujitsubo Cat-Back Exhaust System For Acura RSX remove | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | 3010-43030 | 3203-EX008 | 32003-BH004 | 760-53034 | BC03-SP2EXDC2 | 160-53045 | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | $1,895.00 | $556.45 | $556.45 | $1,200.00 | $617.50 | $950.60 | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | The AWE Tuning Touring Edition Exhaust System w/ 102mm Diamond Black Tips Audi S5 Coupe 3.0T 2013-2017 for your 2013-2017 Audi S5 is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The HKS Hi Power Exhaust Acura Integra GS LS RS Hatchback 92-93 for your 1992-1993 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The HKS Hi Power Exhaust Acura RSX Type S Off Road 02-04 for your 2002-2004 Acura RSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo Legalis R Exhaust Honda Integra Type R 4 Door 1995-1999 for your 1995-1999 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Buddy Club Spec II Catback Exhaust Acura Integra DC2 Type-R 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo RM-01A Exhaust System Acura RSX Type S DC5 02-06 for your 2002-2006 Acura RSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Welcome to the finest catback exhaust for the B7 Audi S4 on the market. The AWE Touring Edition Exhaust for the B7 S4 is a direct bolt on catback system that not only transforms the rear end of the car with its menacing quad tips, but also turns heads with a deep muscluar bass note. Each cat back system features an H-Pipe crossover tube at the front to maximize exhaust scavenging for maximum power, as well as to take a harsh edge off the exhaust sounds. Tubing diameter for the entire system is 2.25". This is a deep bass tone, no matter how you cut it. Dyno proven for legitimate power gains of 14.2 hp and 14.8 lb-ft torque corrected to the crank on our in house Mustang AWD dynamometer, the B7 S4 Performance Exhaust is a must have for any B7 enthusiast. Features: The ultimate exhaust solution for the 3.0T Deep, sophisticated V8 tone Dyno-verified gains of 11 hp and 12 lb-ft of torque at the wheels Aggressive quad tip design Available with Chrome Silver or Diamond Black tips No Check Engine Light ? Guaranteed Perfect Fitment ? Guaranteed Features AWE's Lifetime Warranty Specifications: 180 Technology: Yes 50 State Legal : Yes Edition: Touring Edition Fit Guarantee : Yes Hardware Included: Yes Material: T304L Stainless Steel Muffler Quantity: 3 No CEL Guarantee : Yes System Type: Cat Back Tip Diameter: 102 Tip Diameter: 4 Tip Finish: Diamond Black Tip Qty: 4 Tune Required: No Valves: No | HKS Hi Power Exhaust Acura Integra GS, LS, RS Hatchback 92-93 Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Depending on the application, Hi-Power muffler tips are 96mm, 115mm and 120mm in diameter, piping diameter ranges from 55mm to 95mm. Special Edition HKS Carbon Titanium Hi-Power Exhaust systems are exclusively available for certain popular applications. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping. Hatchback Only. Tip Diameter: 96mm Piping Diameter: 55mm NOTE: picture is for representation only, actual product may vary. | HKS Hi Power Exhaust Acura RSx Type S Off Road 02-04 Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies. Depending on the application, Hi-Power muffler tips are 96mm, 115mm and 120mm in diameter, piping diameter ranges from 55mm to 95mm. Special Edition HKS Carbon Titanium Hi-Power Exhaust systems are exclusively available for certain popular applications. These exclusive versions of the Hi-Power Exhaust consist of a carbon fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping. Off-Road Use Only - 65mm Piping for Turbocharged Applications | Description: Designed for street use, it improves both low-end and mid-range power. All Legalis R systems are constructed of Stainless Steel, and feature mandrel bent piping. Each application is tested to provide optimal power output for street use, while maintaining a deep and quiet tone, which is great for everyday use. Drivers of all ages and skill levels can appreciate the increased power output, and exceptional quality. The Legalis R offers two types of mufflers, an oval crimped type, a the round type (type EVOLUTION). Fujitsubo has carefully selected an exhaust tip to make the style and character of each vehicle application. Features: Order production Exit shape:90 slash (12 °) Pipe diameter:60.5 Minimum ground clearance:Roof height 1340 mm (automobile inspection certificate 1350 mm) measured in vehicles, No.2, 115 mm in No.3 connecting flange Intermediate acceleration:Stock: 3.8 seconds - Fujitsubo: 3.7 seconds Maximum output:Stock: 142.1kw (193.3ps) / 7930rpm - Fujitsubo: 143kw (194.5ps) / 7840rpm Maximum torque:Stock: 178.4Nm (18.2kgm) / 6580rpm - Fujitsubo: 182.3Nm (18.6kgm) / 6410rpm Weight:Stock: 17.2kg - Fujitsubo: 13.8kg Volume idling:Stock: 63dB - Fujitsubo: 61dB Middle RPM Sound:Stock: 75dB - Fujitsubo: 77dB High RPM Sound:Stock: 85dB - Fujitsubo: 89dB Mid RPM Acceleration Sound:Stock: 99dB - Fujitsubo: 102dB Note: Images are for illustration purpose only. Actual product may vary. | Buddy Club Spec II Catback Exhaust Acura Integra DC2 Type-R JDM 94-01 Spec II is a specially designed system for competition use only. Its simple straight thru design creates an increase of exhaust gas velocity in order to improve efficiency. The middle silencer (resonator) on the main pipe is designed to maintain torque in the low to mid speed range. All mufflers are made with SUS304 stainless steel, 1mm is used for main pipe and the ultra 0.8mm is used for main silencer. This combination creates a super light weight muffler. Durability can be seen throughout the construction of the system. The inner silencer is included with all systems. Spec II Exhausts are designed for JDM spec vehicles, may need modifications to fit USDM version vehicles. Note: Pictures are for representation only. Actual product may vary. | The RM-01A was developed for gymkhana, dirt trial, and other competition spec vehicles where mid to high RPM power is crucial. Especially for race classes with strict modification restrictions; the lightweight benefits of the RM-01A can truly be realized. Improved acceleration, response, braking, cornering, reduced tire wear, and all other vehicle behaviors are influenced by weight reduction. Due to all the light weight materials and advanced construction the RM-01A is 50% lighter than OE for most applications. The RM-01A will decrease lap times with improved power and reduced weight. The main pipe and silencer body are 1.0mm, 1.2mm and 1.5mm (Except for certain models) thick SUS304 which is light weight and guaranteed to be durable. All unnecessary weight has been removed from all components, and thicknesses of materials have been selected to produce the ultimate performance exhaust. Features: Quality Stainless Steel Construction Bolt-On Installation Improved Throttle Response Improved Exhaust Note Note(s): Pictures Used For Marketing Purposes Only, Actual Product May Vary. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
Copyright 2023 © Car Tuner Pro LLC | All right reserved. Powered by Auto Parts Authority.
Download App on Mobile (Coming Soon)
