| Description | The AWE Tuning Touring Edition Exhaust Quad Outlet Diamond Black Tips Audi SQ5 3.0T 2014-2017 for your 2014-2017 Audi SQ5 is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Apexi N1 Catback Acura Integra GSR 94-99 for your 1994 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The DC Sports Stainless Steel Exhaust System Acura Integra 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo SuperTi Exhaust Honda NSX 3.0 1990 for your 1990 Acura NSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo Power Getter Exhaust Honda Integra DC5 Type R 2001-2006 for your 2000-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The GReddy Supreme SP Exhaust Acura TSX 2009-2014 for your 2009-2014 Acura TSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. |
| Content | Thanks to AWE's drone-canceling 180 Technology and countless hours of R&D, we were able to craft a system for the SQ5 that enables perfect part throttle cruising when you want it, and a disobedient soundtrack when you're feeling a bit more? aggressive. In other words, the AWE SQ5 Touring Edition Exhaust is the best of both worlds: SQ5. Unlocked: Featuring AWE's drone-canceling solution: 180 Technology Engineered around the SQ5's specific Tiptronic tuning Direct bolt-on Gains of 8 hp and 9 lb-ft of torque to the crank X-Pipe for enhanced exhaust scavenging and improved tone Available with chrome silver or diamond black adjustable quad outlet 102mm tips Crafted from 2.5" T304L stainless steel No CEL Guarantee Fitment Guarantee Lifetime Exhaust Warranty Since there is no independent control of the valves (except "Sport" mode which changes a number of other things), the AWE 180 Technology equipped exhaust responds to driver inputs seamlessly, removing the need for valving. 180 Technology is not the standard, typical approach to performance exhaust design. Through proprietary mathematical calculations, AWE engineers were able to create a sound cancellation resonator that definitively "turns off" the frequency where drone occurs. At the same time, while being able to squelch drone 100%, the resonator design is also providing a 100% straight through, full diameter flow for maximum performance. So, at part throttle, relaxed driving: zero drone. At full throttle, attack mode: straight up aggression (all with no power compromises). Just like a valved system. The Downpipes: When volume is your speed. Turn your SQ5 up to 11 with the AWE SQ5 Non-Resonated Downpipes. These handcrafted T304L stainless steel Non-Resonated Downpipes produce a distinctive, more aggressive sound when coupled with the AWE Touring Edition Exhaust (available separately). Features: Engineered for optimal performance with the Eight-speed Tiptronic transmission Direct bolt-on Gains of 8 hp and 9 lb-ft of torque to the crank X-Pipe for enhanced exhaust scavenging and improved tone Featuring AWE's drone-canceling solution: 180 Technology Available with chrome silver or diamond black adjustable quad outlet 102mm tips Crafted from 2.5" T304L stainless steel No CEL Guarantee Fitment Guarantee Lifetime Exhaust Warranty Specifications: 180 Technology: Yes 50 State Legal : Yes Edition: Touring Edition Fit Guarantee : Yes Hardware Included: Yes Material: T304L Stainless Steel Muffler Quantity: 3 No CEL Guarantee : Yes System Type: Cat Back Tip Diameter: 102 Tip Diameter: 4 Tip Finish: Diamond Black Tip Qty: 4 Tune Required: No Valves: No
| In the N-1 Endurance Race, efficiency is everything. With that in mind, the N-1 exhaust systems were born to satisfy the want for quick throttle response and to effectively handle the rigorous demands of high-horsepower engines. The pipes were engineered with the aid of sophisticated CAD systems to develop the straightest possible lines and least number of bends. The straight-through canister projects from the car at an angle, which helps smooth the exhaust flow. The canister is built from SUS 304 stainless steel and features a 115mm tip with aggressive style. The Super Silencer is included on selected models, which can reduce noise levels by up to 7 decibels. The N-1 Series Mufflers are available for both NA (naturally aspirated) and turbo-charged cars. N1 exhaust must be shipped as an oversize box, therefore shipping will be quoted at the time of sale. Partial shipping is added of 90lb DIM weight. In additional shipping charges we will contact you.
| Bolt on some serious power and aggressive sound with a DC Sports Exhaust System. Custom-made to perfectly fit your specific application. Featuring T304 Stainless Steel material construction. All piping is mandrel bent for optimum flow, featuring a straight-through muffler design for top power output. DC Sports Exhausts are dyno-tuned for maximum performance and have an aggressive exhaust tone under acceleration. Most models exit at factory locations and install at factory mounting points on your vehicle. Incudes all necessary mounting hardware included for a quick and easy installation. Features: Single canister design T304 stainless steel piping Mandrel bent Direct bolt on design Dyno tested for maximum performance Tig welded 12-month warranty Designed and Tested in the U.S.A Installation Guide Fitments: 1994-2001 Acura Integra ALL GS-R/ GS/ LS /RS SE/ Type-R 2 Dr. 1.8L Application Note: all 2dr hatchback only
| Description: Super Ti is Fujitsubo's premier exhaust system. It features full titanium construction, large diameter mandrel piping, and high flow muffler. Each Super Ti kit is developed for optimum horsepower while greatly reducing weight. For a Mitsubishi EVO 9 application the Super Ti was 60% lighter in weight than OE, a difference of 21 lbs. The reduced weight will benefit all aspects of vehicle performance including acceleration, braking, and handling. The goal in development is to increase power throughout the RPM range with an emphasis on high RPM power. All components are made of titanium from tip, muffler, resonators, piping, brackets, and hangers. Super lightweight Titanium construction with a straight through muffler design. Developed to be high flow with an aggressive exhaust note. The compact round shaped muffler and large diameter tip are designed to pursue exhaust efficiency and at the same time reduce sound to acceptable limits. Slashed and straight tip designs are available to offer a sharp feeling. Features: Order production Exit shape:100 slash (titanium, RL) Pipe diameter:60.5 Maximum output:Stock: 196.8kw (267.6ps) / 7200rpm - Fujitsubo: 201.8kw (274.4ps) / 7400rpm Maximum torque:Stock: 282.2Nm (28.8kgm) / 6160rpm - Fujitsubo: 283.2Nm (28.9kgm) / 6380rpm Weight:Stock: 19.8kg - Fujitsubo: 10.8kg Volume idling:Stock: 64dB - Fujitsubo: 71dB Middle RPM Sound:Stock: 84dB - Fujitsubo: 85dB High RPM Sound:Stock: 93dB - Fujitsubo: 97dB Mid RPM Acceleration Sound:Stock: 101dB - Fujitsubo: 111dB Note: Images are for illustration purpose only. Actual product may vary.
| Fujitsubo's spirit is to "produce the highest quality products". This has not changed since Fujitsubo was first established in 1931. This spirit does not only pertain to creating highly efficient and high quality exhausts and manifolds, but it also applies to our customer's satisfaction. This is the reason Research and development is performed with people, motor vehicles, society, environment etc, all thought as one, to create a product through diversity. POWER Getter Series This series was developed to provide great exhaust flow improving torque throughout the low and mid RPM range and increased maximum power. The high quality construction and enhanced diameter allows for sporty yet subtle exhaust note. Clean basic design for original classic stainless look. A great cost-performance option with tuning diversity from normal to tuned engines. The Fujitsubo Power Getter exhausts are high performance replacement cat back exhaust systems manufactured from stainless steel and offer the most optimal pipe design for improved power throughout the entire rev range. Features: Pipe Diameter Exhaust: 60.5mm Maximum output: Stock: 151.4kw(205.9ps)/7670rpm - Fujitsubo: 153.7kw(209.0ps)/7570rpm Maximum torque: 198Nm(20.2kgm)/6690rpm - Fujitsubo: 201.9Nm(20.6kgm)/6740rpm Stock Weight: Stock: 14.1kg - Fujitsubo: 10.4kg Volume idling: Stock: 64dB - Fujitsubo: 69dB Middle RPM Sound: Stock: 92dB - Fujitsubo: 93dB High RPM Sound: Stock: 93dB - Fujitsubo: 103dB Mid RPM Acceleration Sound: Stock: 85dB - Fujitsubo: 92dB
| The Supreme SP for 2009-2014 Acura TSx offers a refine exhaust note with elegant styling to match. The classic dual oval muffler system with large free flowing 63.5mm (2.5") piping produces no exhaust drone. Thanks to the two large SP mufflers, it has excellent sound suppression at idle and cruising. In spirited acceleration, the exhaust note comes to life with a deep rich GReddy sound. The muffler and tip best match the TSx's aero styling. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty Features: Chassis: CU2 Engine: K24A2 Type: Dual Muffler Cat-Back Exhaust Number of pieces: 4pcs Piping: 63.5 mm (2.5") Tip: 102 mm (4.0") Gasket(s): 70mm oval (qty: 3 included) replacement Resonator: Yes Weight: 51.9 lbs? Sound level: 84 / 85 dB(a) @4500 HP: +3 ?hp TRQ: +3 ?ft-lbs Note(s): Pictures Used For Marketing Purposes Only, Actual Product May Vary For Any Questions, Please Contact a Car Tuner Pro Performance Specialist
|
| Additional information |
|
|
|
|
|
| Brand |
Greddy
|
| Make |
Acura
|
| Model |
TSX
|
| Sub Model |
|
| Year |
2009, 2010, 2011, 2012, 2013, 2014
|
|
