Description | The Milltek Catback Exhaust System Audi SQ5 3.0 TFSI Supercharged 2013-2016 for your 2014-2021 Audi SQ5 is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo RM-01A Exhaust System Acura RSX Type S DC5 02-06 for your 2002-2006 Acura RSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Buddy Club Spec II Catback Exhaust Acura Integra DC2 Type-R 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Greddy Supreme SP Exhaust Acura Integra 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo Power Getter Exhaust Honda Integra DC2 Type R 1995-2000 for your 2000-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Apexi N1 Catback Acura Integra GSR 94-99 for your 1994 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. |
Content | Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate Milltek Sport range of performance products. Milltek Sport offer an ever expanding comprehensive selection of Performance exhausts which build on the successes of key marquees like Audi, Volkswagen, Porsche, Mini and BMW. This has placed Milltek Sport at the forefront of tuning companies and owners must have list. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discoloration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Milltek Sport exhausts have a genuine performance edge - noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Features: 1 x LH Downpipe 1 x RH Downpipe 1 x Front Silencer Assembly 1 x Centre Silencer 1 x LH Rear Silencer Assembly 1 x RH Rear Silencer Assembly Valve motor from the OE exhaust is required for fitment 4 x Carbon Jet-100 Trims (To Fit 63.5mm OD Outlets) Tailpipe Style: 102 Jet Pipe Diameter: 2.37" (60.30mm) Notes: Quad Carbon Jet-100 Tips YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser.
| The RM-01A was developed for gymkhana, dirt trial, and other competition spec vehicles where mid to high RPM power is crucial. Especially for race classes with strict modification restrictions; the lightweight benefits of the RM-01A can truly be realized. Improved acceleration, response, braking, cornering, reduced tire wear, and all other vehicle behaviors are influenced by weight reduction. Due to all the light weight materials and advanced construction the RM-01A is 50% lighter than OE for most applications. The RM-01A will decrease lap times with improved power and reduced weight. The main pipe and silencer body are 1.0mm, 1.2mm and 1.5mm (Except for certain models) thick SUS304 which is light weight and guaranteed to be durable. All unnecessary weight has been removed from all components, and thicknesses of materials have been selected to produce the ultimate performance exhaust. Features: Quality Stainless Steel Construction Bolt-On Installation Improved Throttle Response Improved Exhaust Note Note(s): Pictures Used For Marketing Purposes Only, Actual Product May Vary. YouTube An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser.
| Buddy Club Spec II Catback Exhaust Acura Integra DC2 Type-R JDM 94-01 Spec II is a specially designed system for competition use only. Its simple straight thru design creates an increase of exhaust gas velocity in order to improve efficiency. The middle silencer (resonator) on the main pipe is designed to maintain torque in the low to mid speed range. All mufflers are made with SUS304 stainless steel, 1mm is used for main pipe and the ultra 0.8mm is used for main silencer. This combination creates a super light weight muffler. Durability can be seen throughout the construction of the system. The inner silencer is included with all systems. Spec II Exhausts are designed for JDM spec vehicles, may need modifications to fit USDM version vehicles. Note: Pictures are for representation only. Actual product may vary.
| The classic SP exhaust for iconic (DC) Acura Integra has returned, but this time this Supreme SP is designed with larger diameter piping to suit tuned 1994-2001 Integra LS/RS and 2000-2001 Integra GSR. Ideal for bolt-on turbo or supercharger kits or high-flow N/A applications, this version features large diameter 76mm (3") muffler and piping, with only a short inlet portion of 63.5mm (2.5") to allow it to still bolt up to factory catalytic converter flanges. The large mid-pipe resonator and off-set oval Supreme SP muffler allow for deep rich exhaust note throughout the B18 engine's RPM range. Careful attention to routing allows for simple install, and OEM like fitment. All GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty Specifications: Chassis: DC Engine: B18 (94-01 B18 LS / RS & 00-01 B18C GSR) Type: Cat-Back Exhaust Number of pieces: 3 pcs Piping: 76 mm (3 ") - slight taper of 2.5" to fit the factory catalyic-conveter Tip: 105mm (4.1") Gasket(s): 3" oval (qty: 2 included) replacement Resonator: Yes Fitments: 1994-2001 Integra RS / LS (w/ B18B-series engine) 2000-2001 Integra GSR (w/ B18C-series engine)
| Fujitsubo's spirit is to "produce the highest quality products". This has not changed since Fujitsubo was first established in 1931. This spirit does not only pertain to creating highly efficient and high quality exhausts and manifolds, but it also applies to our customer's satisfaction. This is the reason Research and development is performed with people, motor vehicles, society, environment etc, all thought as one, to create a product through diversity. POWER Getter Series This series was developed to provide great exhaust flow improving torque throughout the low and mid RPM range and increased maximum power. The high quality construction and enhanced diameter allows for sporty yet subtle exhaust note. Clean basic design for original classic stainless look. A great cost-performance option with tuning diversity from normal to tuned engines. The Fujitsubo Power Getter exhausts are high performance replacement cat back exhaust systems manufactured from stainless steel and offer the most optimal pipe design for improved power throughout the entire rev range. Features: Pipe Diameter Exhaust: 60.5mm Maximum output: Stock: 141.2kw(192.0ps)/7760rpm - Fujitsubo: 144.8kw(196.9ps)/7680rpm Maximum torque: 182.3Nm(18.6kgm)/6330rpm - Fujitsubo: 189.1Nm(19.3kgm)/6130rpm Stock Weight: Stock: 17.2kg - Fujitsubo: 12.1kg Volume idling: Stock: 67dB - Fujitsubo: 69dB Middle RPM Sound: Stock: 94dB - Fujitsubo: 94dB High RPM Sound: Stock: 98dB - Fujitsubo: 105dB Mid RPM Acceleration Sound: Stock: 87dB - Fujitsubo: 91dB
| In the N-1 Endurance Race, efficiency is everything. With that in mind, the N-1 exhaust systems were born to satisfy the want for quick throttle response and to effectively handle the rigorous demands of high-horsepower engines. The pipes were engineered with the aid of sophisticated CAD systems to develop the straightest possible lines and least number of bends. The straight-through canister projects from the car at an angle, which helps smooth the exhaust flow. The canister is built from SUS 304 stainless steel and features a 115mm tip with aggressive style. The Super Silencer is included on selected models, which can reduce noise levels by up to 7 decibels. The N-1 Series Mufflers are available for both NA (naturally aspirated) and turbo-charged cars. N1 exhaust must be shipped as an oversize box, therefore shipping will be quoted at the time of sale. Partial shipping is added of 90lb DIM weight. In additional shipping charges we will contact you.
|
Additional information |
Brand |
Milltek
|
Make |
Audi
|
Model |
SQ5
|
Year |
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
|
|
|
|
|
|
|