Description | The Milltek Catback Resonated Quieter OPF/GPF Exhaust System Audi SQ7 4.0 V8 TT Gasoline Non-OPF Equipped Vehicles 2020-2023 for your 2021-2023 Audi SQ7 is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Buddy Club Spec II Catback Exhaust System Acura RSX 2002-2006 for your 2002-2006 Acura RSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Greddy Supreme SP Exhaust Acura Integra 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo Legalis R Exhaust System Acura TSX 04-05 for your 2004-2005 Acura TSX is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The DC Sports Stainless Steel Exhaust System Acura Integra 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Apexi N1 Catback Acura Integra GSR 94-99 for your 1994 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. |
Content | Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate Milltek Sport range of performance products. Milltek Sport offers an ever-expanding comprehensive selection of Performance exhausts which build on the successes of key marques like Audi, Volkswagen, Porsche, Mini, and BMW. This has placed Milltek Sport at the forefront of tuning companies and owners must-have list. Milltek Sport exhausts are produced in high-quality type 304 aircraft-grade stainless steel. This material is anti-magnetic and is less susceptible to discoloration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Note: All Milltek products ship directly from the Manufacturer. Customer is responsible for all customs and duty fees associated with shipment.
| The Buddy Club Spec II Catback Exhaust System is specially designed system for competition use only. Its simple straight thru design creates an increase of exhaust gas velocity in order to improve efficiency. This exhaust uses a middle silencer (resonator) on the main pipe to help maintain torque in the low to mid speed range. All mufflers are made with SUS304 stainless steel, 1mm is used for main pipe. and the ultra 0.8mm is used for main silencer combine with 76.2mm (3") exhaust piping. This combination creates a super light weight muffler and turbo setup to maintain broad power band. Inner silencer are included with the kit. Features: Direct Bolt On Install Light Weight and Highly Efficient Made of SUS304 Stainless Steel Efficient Middle Resonator Low Throaty Tone Note: Pictures are used for marketing purposes only, actual product may vary.
| The classic SP exhaust for iconic (DC) Acura Integra has returned, but this time this Supreme SP is designed with larger diameter piping to suit tuned 1994-2001 Integra LS/RS and 2000-2001 Integra GSR. Ideal for bolt-on turbo or supercharger kits or high-flow N/A applications, this version features large diameter 76mm (3") muffler and piping, with only a short inlet portion of 63.5mm (2.5") to allow it to still bolt up to factory catalytic converter flanges. The large mid-pipe resonator and off-set oval Supreme SP muffler allow for deep rich exhaust note throughout the B18 engine's RPM range. Careful attention to routing allows for simple install, and OEM like fitment. All GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty Specifications: Chassis: DC Engine: B18 (94-01 B18 LS / RS & 00-01 B18C GSR) Type: Cat-Back Exhaust Number of pieces: 3 pcs Piping: 76 mm (3 ") - slight taper of 2.5" to fit the factory catalyic-conveter Tip: 105mm (4.1") Gasket(s): 3" oval (qty: 2 included) replacement Resonator: Yes Fitments: 1994-2001 Integra RS / LS (w/ B18B-series engine) 2000-2001 Integra GSR (w/ B18C-series engine)
| Designed for street use, it improves both low-end and mid-range power. All LegalisR systems are constructed of Stainless Steel, and feature mandrel bent piping. Each application is tested to provide optimal power output for street use, while maintaining a deep and quiet tone, which is great for everyday use. Drivers of all ages and skill levels can appreciate the increased power output, and exceptional quality. The Legalis R offers two types of mufflers, an oval crimped type, a the round type (type EVOLUTION). Fujitsubo has carefully selected an exhaust tip to make the style and character of each vehicle application. Features: Quality Stainless Steel Construction Bolt-On Installation Improved Throttle Response Improved Exhaust Note Note(s): Pictures Used For Marketing Purposes Only, Actual Product May Vary.
| Bolt on some serious power and aggressive sound with a DC Sports Exhaust System. Custom-made to perfectly fit your specific application. Featuring T304 Stainless Steel material construction. All piping is mandrel bent for optimum flow, featuring a straight-through muffler design for top power output. DC Sports Exhausts are dyno-tuned for maximum performance and have an aggressive exhaust tone under acceleration. Most models exit at factory locations and install at factory mounting points on your vehicle. Incudes all necessary mounting hardware included for a quick and easy installation. Features: Single canister design T304 stainless steel piping Mandrel bent Direct bolt on design Dyno tested for maximum performance Tig welded 12-month warranty Designed and Tested in the U.S.A Installation Guide Fitments: 1994-2001 Acura Integra ALL GS-R/ GS/ LS /RS SE/ Type-R 2 Dr. 1.8L Application Note: all 2dr hatchback only
| In the N-1 Endurance Race, efficiency is everything. With that in mind, the N-1 exhaust systems were born to satisfy the want for quick throttle response and to effectively handle the rigorous demands of high-horsepower engines. The pipes were engineered with the aid of sophisticated CAD systems to develop the straightest possible lines and least number of bends. The straight-through canister projects from the car at an angle, which helps smooth the exhaust flow. The canister is built from SUS 304 stainless steel and features a 115mm tip with aggressive style. The Super Silencer is included on selected models, which can reduce noise levels by up to 7 decibels. The N-1 Series Mufflers are available for both NA (naturally aspirated) and turbo-charged cars. N1 exhaust must be shipped as an oversize box, therefore shipping will be quoted at the time of sale. Partial shipping is added of 90lb DIM weight. In additional shipping charges we will contact you.
|
Additional information |
|
|
|
|
|
|