Description | The VR Performance Audi S4 | S5 B8 Stainless Valvetronic Exhaust System for your 2009-2019 Audi S5 is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo Power Getter Exhaust Honda Integra DC2 Type R 1995-2000 for your 2000-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Apexi N1 Catback Acura Integra GSR 94-99 for your 1994 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo Legalis R Exhaust Honda Integra Type R 2001-2006 for your 2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Fujitsubo Power Getter Exhaust Honda Integra DC5 Type R 2001-2006 for your 2000-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. | The Buddy Club Spec II Catback Exhaust Acura Integra DC2 Type-R 1994-2001 for your 1994-2001 Acura Integra is a great way to increase horsepower and torque gains by replacing your restricted factory car exhaust system. |
Content | Looking at the Audi B8 S4/S5, you'd expect a decently aggressive exhaust note to match the aggressive styling, but unfortunately, Audi did not deliver on that. Simply put, the B8 S4 and S5 both have quiet and tame exhaust notes, but luckily VR Performance fixed this issue with their stainless steel Valvetronic exhaust system. This exhaust system features dual 2.5-inch (63.5mm) mandrel-bent tubing, which flows much better than the stock exhaust system. With more exhaust flows comes more power and more efficiency. Not only that, but this exhaust system is also lightweight at just 66.15lbs for the entire system. The integrated Valvetronic system allows the exhaust flow to be routed through or around the mufflers, allowing you to change the exhaust note on the fly. Opening the valves will give off an incredible tone that is unmatched, while you also have the option to close the valves for an elevated factory-sounding exhaust. Features: High-quality 304 stainless steel tubing Open valves bypass muffler for an aggressive tone Closed valves will give an elevated factory sounding exhaust Dual 2.5-inch (63.5mm) mandrel-bent tubing Lightweight 66.15lb construction Significantly reduces back pressure Precision fitment thanks to 3D scanning and CAD Modeling No modification is required for installation
| Fujitsubo's spirit is to "produce the highest quality products". This has not changed since Fujitsubo was first established in 1931. This spirit does not only pertain to creating highly efficient and high quality exhausts and manifolds, but it also applies to our customer's satisfaction. This is the reason Research and development is performed with people, motor vehicles, society, environment etc, all thought as one, to create a product through diversity. POWER Getter Series This series was developed to provide great exhaust flow improving torque throughout the low and mid RPM range and increased maximum power. The high quality construction and enhanced diameter allows for sporty yet subtle exhaust note. Clean basic design for original classic stainless look. A great cost-performance option with tuning diversity from normal to tuned engines. The Fujitsubo Power Getter exhausts are high performance replacement cat back exhaust systems manufactured from stainless steel and offer the most optimal pipe design for improved power throughout the entire rev range. Features: Pipe Diameter Exhaust: 60.5mm Maximum output: Stock: 141.2kw(192.0ps)/7760rpm - Fujitsubo: 144.8kw(196.9ps)/7680rpm Maximum torque: 182.3Nm(18.6kgm)/6330rpm - Fujitsubo: 189.1Nm(19.3kgm)/6130rpm Stock Weight: Stock: 17.2kg - Fujitsubo: 12.1kg Volume idling: Stock: 67dB - Fujitsubo: 69dB Middle RPM Sound: Stock: 94dB - Fujitsubo: 94dB High RPM Sound: Stock: 98dB - Fujitsubo: 105dB Mid RPM Acceleration Sound: Stock: 87dB - Fujitsubo: 91dB
| In the N-1 Endurance Race, efficiency is everything. With that in mind, the N-1 exhaust systems were born to satisfy the want for quick throttle response and to effectively handle the rigorous demands of high-horsepower engines. The pipes were engineered with the aid of sophisticated CAD systems to develop the straightest possible lines and least number of bends. The straight-through canister projects from the car at an angle, which helps smooth the exhaust flow. The canister is built from SUS 304 stainless steel and features a 115mm tip with aggressive style. The Super Silencer is included on selected models, which can reduce noise levels by up to 7 decibels. The N-1 Series Mufflers are available for both NA (naturally aspirated) and turbo-charged cars. N1 exhaust must be shipped as an oversize box, therefore shipping will be quoted at the time of sale. Partial shipping is added of 90lb DIM weight. In additional shipping charges we will contact you.
| Description: Designed for street use, it improves both low-end and mid-range power. All Legalis R systems are constructed of Stainless Steel, and feature mandrel bent piping. Each application is tested to provide optimal power output for street use, while maintaining a deep and quiet tone, which is great for everyday use. Drivers of all ages and skill levels can appreciate the increased power output, and exceptional quality. The Legalis R offers two types of mufflers, an oval crimped type, a the round type (type EVOLUTION). Fujitsubo has carefully selected an exhaust tip to make the style and character of each vehicle application. Features: Order production Exit shape:101.6 slash (12 °) Pipe diameter:60.5 Minimum ground clearance:Roof High 1392Mm (vehicle inspection 1380Mm) measuring drive, 128mm in the intermediate pipe portion (1085Mm behind the front axle) Intermediate acceleration:Stock: 3.3 seconds - Fujitsubo: 3.2 seconds Maximum output:Stock: 144.8kw (196.9ps) / 7730rpm - Fujitsubo: 147kw (199.9ps) / 7760rpm Maximum torque:Stock: 191.1Nm (19.5kgm) / 6770rpm - Fujitsubo: 192.1Nm (19.6kgm) / 6750rpm Weight:Stock: 14.1kg - Fujitsubo: 12.6kg Volume idling:Stock: 64dB - Fujitsubo: 67dB Middle RPM Sound:Stock: 74dB - Fujitsubo: 80dB High RPM Sound:Stock: 85dB - Fujitsubo: 89dB Note: Images are for illustration purpose only. Actual product may vary.
| Fujitsubo's spirit is to "produce the highest quality products". This has not changed since Fujitsubo was first established in 1931. This spirit does not only pertain to creating highly efficient and high quality exhausts and manifolds, but it also applies to our customer's satisfaction. This is the reason Research and development is performed with people, motor vehicles, society, environment etc, all thought as one, to create a product through diversity. POWER Getter Series This series was developed to provide great exhaust flow improving torque throughout the low and mid RPM range and increased maximum power. The high quality construction and enhanced diameter allows for sporty yet subtle exhaust note. Clean basic design for original classic stainless look. A great cost-performance option with tuning diversity from normal to tuned engines. The Fujitsubo Power Getter exhausts are high performance replacement cat back exhaust systems manufactured from stainless steel and offer the most optimal pipe design for improved power throughout the entire rev range. Features: Pipe Diameter Exhaust: 60.5mm Maximum output: Stock: 151.4kw(205.9ps)/7670rpm - Fujitsubo: 153.7kw(209.0ps)/7570rpm Maximum torque: 198Nm(20.2kgm)/6690rpm - Fujitsubo: 201.9Nm(20.6kgm)/6740rpm Stock Weight: Stock: 14.1kg - Fujitsubo: 10.4kg Volume idling: Stock: 64dB - Fujitsubo: 69dB Middle RPM Sound: Stock: 92dB - Fujitsubo: 93dB High RPM Sound: Stock: 93dB - Fujitsubo: 103dB Mid RPM Acceleration Sound: Stock: 85dB - Fujitsubo: 92dB
| Buddy Club Spec II Catback Exhaust Acura Integra DC2 Type-R JDM 94-01 Spec II is a specially designed system for competition use only. Its simple straight thru design creates an increase of exhaust gas velocity in order to improve efficiency. The middle silencer (resonator) on the main pipe is designed to maintain torque in the low to mid speed range. All mufflers are made with SUS304 stainless steel, 1mm is used for main pipe and the ultra 0.8mm is used for main silencer. This combination creates a super light weight muffler. Durability can be seen throughout the construction of the system. The inner silencer is included with all systems. Spec II Exhausts are designed for JDM spec vehicles, may need modifications to fit USDM version vehicles. Note: Pictures are for representation only. Actual product may vary.
|
Additional information |
Brand |
VR Performance
|
Make |
Audi
|
Model |
S5
|
Year |
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
|
|
|
|
|
|
|